
Most outdoor graphics don’t fail because the design was wrong. They fail because the media was wrong — the wrong PVC, the wrong adhesive, or no overlaminate at all. After a summer of UV and a winter of rain, you get what every installer dreads: faded reds, lifted edges, and silvering on glass.
At Labellet we’ve spent 21+ years coating and converting pressure-sensitive media in our 70,000㎡ GBA plant. This is our shop-floor take on printable self-adhesive vinyl for outdoor graphics — what actually holds up on vans, storefronts and curtain walls, and how to spec it right the first time.
1. What “outdoor-durable” really means on press
“Waterproof” on a spec sheet means very little. For fleet and building graphics we test three things:
- Dimensional stability: Monomeric calendered PVC wants to shrink back when it gets hot. On a flat hoarding that’s fine. On a fender or rivet, it lifts. That’s why we run polymeric calendered stock for vehicle curves — far less memory, far less edge curl.
- Color hold: Eco-solvent and latex inks look great on day one. Without UV absorbers in the face film or overlaminate, magenta and yellow chalk out in 8-12 months. Our outdoor grades are built around UV-filtering topcoats, ISO 9001 batch-tested to FTM / ASTM / GB methods.
- Adhesive system: High-tack solvent acrylic for painted metal and low-energy plastics; low-tack removable acrylic with air-egress liner for glass and short-term retail. Same face film, totally different install — and removal.
All Labellet outdoor runs are SGS-checked and compliant with REACH and RoHS, coated low-VOC. It’s not a green slogan — low-solvent coating is what keeps your shop air breathable and your Latex heads from clogging with outgassing.
2. Three workhorses we run every week
No.1 PVC fleet wrap vinyl — not just a “car sticker”
Best for: vans, delivery fleets, outdoor hoardings, transit graphics

This is a polymeric printable self-adhesive vinyl built for road life. The face is printable across Eco-solvent, UV and Latex at 1440dpi without ink pooling, and the topcoat carries the scratch load — shopping carts, pressure washers, wiper drag.
- Anti-UV face: resists yellowing, shrinkage and gloss loss; reds and blacks stay clean after a full summer outdoors.
- Abrasion layer: stands up to brush washes and daily rubs without hazing the print.
- Sticks where it should: solvent acrylic holds to painted steel, glass and ABS trim, yet strips without baking onto clearcoat when the campaign ends.
Shop tip: if you’re wrapping deep recesses, warm it to 40-50°C and post-heat to 90°C. Pair it with cold laminate below and you’re good for 3-5 years vertical outdoors — not three months.
No.2 Cold lamination film for large format prints
Best for: lightbox faces, promo posters, exhibition boards, floor-adjacent graphics

Ink alone was never meant to take sun and mop water. Our cold lamination film for large format prints is the clear overlaminate that does the dirty work — pressure-applied, no heat, matte or gloss.
- Crystal PVC, no yellow cast: keeps whites white and barcode contrast high.
- Nano anti-corrosion + antistatic coat: shrugs off acid rain, salt spray and dust pickup at the storefront.
- Matte bumps perceived depth; gloss pops backlit color. Either way, scuffs land on a replaceable 80-micron skin, not on your print.
We see shops cut reprints by half once they stop shipping unlaminated outdoor posters. It’s the cheapest insurance in wide format.
No.3 Removable glass decal vinyl
Best for: curtain walls, café windows, office partitions, safety markings

Glass is unforgiving — every bubble shows. This removable glass decal vinyl runs at ~90% light transmission, so the shop stays bright while the graphic reads from the street. The coating is hydrophobic, rain sheets off instead of spotting.
- Shatter-hold: the film webs on impact and keeps shards together, a real plus for malls and schools.
- Repositionable acrylic + gridded liner: slide it, squeegee it, peel it back. A two-person storefront that used to take an afternoon now takes an hour.
- Clean removability: pulls in one sheet for seasonal campaigns, no ghost adhesive to razor off.
3. How we build for B2B shops, not hobby cutters
- Fast sampling that matches production: we strike your ICC profile on the actual production roll, not lab sheets, so color on the 500-meter order looks like the A3 proof you signed.
- Slitting and adhesive on demand: multiple coating lines + rotary slitting. Need 1.27m / 1.52m widths, high-tack for cold warehouses or low-tack for short-term glass? We set tack and liner release to your laminator and climate.
- Capacity you can plan around: 30,000㎡ converting base, 300+ crew. Fleet rollouts don’t wait because one coater went down.
Need help picking between monomeric for flat short-term and polymeric for curves? Send a photo of the substrate and dwell time — we’ll spec face, adhesive and overlaminate in one email, plus install notes.
Bottom line
Good outdoor graphics are a system: the right outdoor durable printable vinyl media + the right cold laminate + the right tack for the surface. Get that stack right and you stop paying for call-backs and reprints.
Request a free sample roll → Tell us your printer (Eco-solvent / UV / Latex), application and expected outdoor life. We’ll cut it to your width and ship with a lamination swatch so you can test adhesion and color before you commit.



