☎ +86 13392540241 ✉ sale@labellet.com 🕒 26 yrs label experience  ·  ISO 9001 CERTIFIED

PHOTOLUMINESCENT FILMS · 1.27 M WIDE · 30 M ROLLS · 30-MINUTE CHARGE · 6-HOUR AFTERGLOW

Glow in the Dark Stickers That Still Read at Midnight

Photoluminescent foil, PET and fabric-backed self-adhesive film, coated and slit in our own plant. Send us the surface and the number of hours it has to read, and we set the grain, the thickness and the adhesive around those answers.

30-minute charge → 6-hour afterglowR13 slip classB1 flame class1.27 × 30 m roll supply

COATED, SLIT AND CHECKED IN OUR OWN PLANT

Labellet, a Glow in the Dark Sticker Manufacturer in China

Photoluminescent film does not make light. It absorbs what the sun or a lamp gives it during the day, then releases it slowly after dark.

That slow release is what sets how bright a wall looks at eleven at night. The glow depends on how long the film was charged and on how strong the light source was, and if either one is wrong the figures on the brochure mean nothing. So we start with two questions. What surface is the film going onto, and how many hours does the marking have to stay legible? Everything else, down to the texture and the adhesive, is decided from those answers. The paperwork for the build ships in the carton with the roll. How did we do it?

Where this page sits: it covers photoluminescent self-adhesive film and stickers, that is decorative, signage and safety graphics cut from a wide web. If you are laying continuous line-marking rolls across a warehouse floor instead, start with our industrial floor marking tape range, where CP-3465 and CP-3466 also appear under their tape specifications.

Photoluminescent Film with Controlled Grain and Blend

The luminous material and its particle grading are ours to formulate, and performance can be set to suit the application. CP-3465 in coarse sand and CP-3466 in fine sand deliver the same glow: both absorb light for 30 minutes and keep glowing for 6 hours. Particle size and coat thickness together set how quickly the film takes up light and how the decay curve falls away. Long-life environmental material can also be configured to the recognition distance and duration the project calls for.

Glow in the Dark Stickers in Fine Sand, Coarse Sand and Long-Glow Grades

The glow range covers fine sand, coarse sand and long-duration grades at several levels. Standard grades need no material wait, and we deliver a stable 3 to 5 days for proofing and 7 to 15 days for production. Special grades take longer: extra-heavy floor film, dark glow coats, a set afterglow duration or a custom glow colour run 5 to 7 days for proofing and 10 to 18 days for production.

Self-Adhesive Photoluminescent Film on a 1.27 m Continuous Web

We supply the full 1.27 m web width in continuous rolls, and the material stays flat through slitting, transport and laying without creasing, blocking or taking a set. One production spec covers the whole build: surface coating, aluminium foil base, transparent removable adhesive and a 140 g double-PE liner. Every roll is checked as it leaves the line for surface, adhesion, thickness and performance.

For the decorative and signage grades of the same material, and the evidence behind the charge figures, see our full foil sticker range, removable wall film, photoluminescent test reports and production cases.

FOUR STANDARD GRADES

Which Photoluminescent self-adhesive Sticker Grade Fits the Surface

One grade for directional marking that has to read clearly, one for warning zones where night visibility and wear life both matter, a heavy foil where wear beats glow, and a fabric-backed grade for flexible scenery.

The two sand grades run on identical charge and afterglow terms, so choosing between them is a decision about the surface.

ModelGradeThicknessSupply formatConstructionWhere it earns its place
CP-3466Fine sand photoluminescent film470+ µm1.27 m × 30 mFine sand coat + foil + 140 g double-PE linerQuiet surface, clear marking. Directional use on floors and walls.
CP-3465Coarse sand photoluminescent film530+ µm1.27 m × 30 mCoarse sand coat + foil + 140 g double-PE linerGrains read better at night and wear better. Warning zones and heavy traffic.
CP-3511Heavy-duty coarse foil grade630+ µm1.27 m × 30 mCoarse coat + foil + 140 g double-PE linerThe heaviest build in the range. Where wear life matters more than the glow, this is the grade we quote.
CP-4117Fabric-backed photoluminescent film470–500 µmCut to orderSand coat + fabric-backed base + 140 g double-PE linerFolds, trims and washes. Flexible scenery that is changed often.

FOUR SOLUTIONS · ONE FILM FAMILY

Pick Your Glow in the Dark Sticker Solution: Safety, Facade, Backup & Scenery

What survives the night is decided by the material underneath, the charge it gets and the grain it carries, not by the glow alone.

Safety MarkingGlow in the Dark Stickers for Road, Kerb and Step Protection

One grade for the lines, one for the warnings · no extra lighting needed

luminous-floor-tapeThe problem is a road that stops being readable the moment the lighting drops. Our answer is a film that charges under daylight and holds its boundary all night without adding a lamp to the circuit. The 470+ µm face goes down for directional strips on grey concrete or asphalt, where a fine texture keeps the surface flat and the graphic readable. The 530+ µm face carries the warning blocks, where more light has to come back and the film has to survive traffic. The metallic ground separates the marking from what is underneath it, and the film beds down under a rubber mallet without lifting or hollowing.

  • Crossings, zebra boundaries, underpass entrances and step nosings.
  • SGS reports cover R13 slip, B1 flame, water, wear, antibacterial and mildew on the same build.
  • The 470+ µm grade cuts and splices into arrows, numbers and guide lines; CP-3465 holds the warning zones.

Facade & SignagePhotoluminescent Cladding Film for Shopfront Facades and Night Lighting

Metal by day, self-luminous by night · one film does both

A shopfront usually has to choose between looking good in daylight and being noticed at night. This film removes the choice. The glow layer charges under daylight and shop lighting, then releases a soft cold light after dark, while the aluminium foil underneath adds the metallic reflection. One film gives you a metal look in the afternoon and a self-luminous surface at night. At 1.27 m the web covers a full frontage in one run, which keeps seams out of the middle of the elevation.

  • Decorative facade panels, public-space signage and night-scene beautification projects.
  • Cuts to letters and shapes on the same line as the foil decoration work.
  • One run covers a full frontage, so there are no seams across the elevation.

Backup GuidanceGlow in the Dark Stickers for Underground Car Parks and Transit Passages

Holds the route for six hours after a lighting failure · backup, not a replacement

Underground space is the least favourable condition a light-charging film can meet, because daylight does not reach it and the charge depends entirely on the installation lighting. The solution is a marking that stores what the ceiling lights give it and holds it for the hours after a failure. Confirm the hours and intensity of that lighting before anything else. Pull the light source and the film can only give back what it stored, so a short charge compresses the afterglow well below the quoted figure. Our recommendation for car parks and passages is to keep the safety lighting running and treat the glow film as the backup when it fails.

  • Metro, high-speed rail and airport passages, exit steps, ramp and wall direction marks.
  • Column numbers and turn indicators charge under the ceiling lighting and release after hours.
  • A short charge compresses the afterglow, so the lighting schedule has to be checked before the grade is chosen.

Scenery & ExhibitionsWashable Glow in the Dark Stickers for Museums, Theme Parks and Stage Sets

Foil for hard surfaces · washable CP-4117 for sets that get rebuilt

Exhibition scenery is rebuilt every few weeks, and a rigid graphic gets in the way of the crew. The foil range solves the hard-surface side, clinging to rough panels and carrying the metallic finish. Fabric-backed CP-4117 solves the other side: it folds, trims and washes, so it survives the handling that foil cannot and comes off clean when the set is struck. Charged direction marks and wall graphics keep the night route readable through the same cycle.

  • Night circulation signage, decorative wall graphics and portable scenery elements.
  • Fabric-backed grade takes the handling that foil cannot.
  • Charge the marks before the doors open and they carry the route through the whole session.

For the wider aluminium foil range, including printable and washable faces, see our foil sticker families.

SPECIFICATION COMPARISON

Photoluminescent Self-adhesive Sticker Specifications Compared Side by Side

Construction, thickness, adhesive, ratings and supply format for the standard grades.

ItemCP-3466 · Fine sandCP-3465 · Coarse sandCP-4117 · Fabric-backed
Face constructionSand coat + aluminium foilSand coat + aluminium foilSand coat + fabric-backed base
Thickness470+ µm530+ µm470–500 µm
AdhesiveHigh-tack transparent removableHigh-tack transparent removableHigh-tack transparent removable
Liner140 g double-PE140 g double-PE140 g double-PE
Charge / afterglow30-minute charge, 6-hour afterglow30-minute charge, 6-hour afterglow30-minute charge, 6-hour afterglow
SurfaceFine sand, quietCoarse sand, high night visibilityTextile, washable
Slip ratingR13 (DIN 51130)R13 (DIN 51130)R13 on hard-floor application
Flame ratingB1 (GB 8624)B1 (GB 8624)B1 (GB 8624)
SubstratesCement, asphalt, wall brick, timber, metalCement, asphalt, wall brick, metalFlexible scenery, curved and soft surfaces
Supply format1.27 m × 30 m roll (4.17 ft × 98.4 ft)1.27 m × 30 m roll (4.17 ft × 98.4 ft)Cut to project size
MOQ / lead100 m · 3-5 day proof / 7-15 day production100 m · 3-5 day proof / 7-15 day productionTo order · 5-7 day proof / 10-18 day production

BUILT AROUND THE BRIEF

Custom Glow in the Dark Stickers in 5 Decisions

Five answers decide the build. Send them with the quantity and the location, and the quotation comes back in one round.

01 - Afterglow and glow colour

We set the pigment dosage and the surface profile to the duration and colour you specify. One point worth flagging early: the colder and bluer the glow tone, the lower the brightness usually runs against a warm white system, so we confirm the real look on a proof before the run.

02 - Sand grain

Fine sand, coarse sand or a longer-duration grade. Texture and durability are decided together here: the bigger the grain, the thicker the coating and the better it stands up to traffic.

03 - Thickness and web width

Adjustable within the 470 to 630+ µm band. Non-standard widths are checked against the coating line first, and the 1.27 m continuous web covers the normal laying widths on site.

04 - Composite build

The glow coat can be laminated onto aluminium foil, PET or a fabric base, so hard surfaces, flat panels and flexible surfaces are all covered within one product family.

05 - Roll length and packing

Roll length follows the project take-off rather than a fixed 30 m, so a plaza orders what it lays and a showroom orders what it fits. Non-standard lengths are checked against the coater before the order is confirmed. Export orders go out with waterproof packing and your own shipping marks, so the film arrives dry and identifiable on site.

LAB-VERIFIED PERFORMANCE DATA

How Our Photoluminescent Films Perform

The glow figures, the ratings and the surfaces we have tested on all sit on one page, with the source stated for each.

PropertyWhat it means on siteSource
Afterglow durationCharged for half an hour, the film keeps releasing light for six hours.Model specification
Glow pigmentLong-life environmental pigment, no radioactive charge source.Product data sheet
WaterproofUsed outdoors on floors and walls; prolonged rain exposure does not stop it working.Tested · SGS
Wear-resistantCoarse grains hold their night visibility longer than a smooth face.Model specification
B1 fire ratingFlame behaviour class B1 to GB 8624 for building materials.Tested · SGS
AntibacterialHigh-grade antibacterial performance, suited to high-touch public areas.Tested · SGS
Anti-slip R13Slip class R13 for municipal road and outdoor floor use.Tested · SGS
Mildew-proofNo mould growth in humid conditions over long service.Tested · SGS
Weather resistantStable in outdoor conditions and usable indoors as well.Tested · SGS
Various materialsHolds on cement, wall brick, metal and rough surfaces.Model specification

Reading the table: afterglow = the hours of light given back after the charge · R13 = slip class to DIN 51130 · B1 = flame class to GB 8624 · SGS = third-party test house · a model specification is a controlled build value rather than a lab result.

Full reports on request. Email sale@labellet.com

WHY LABELLET FOR GLOW FILM

Why Buyers Keep the Glow on Our Rolls

Four things decide whether a glow film still works a year after it goes on the wall.

Everything below is made in our own plant, which is why the numbers hold from the first roll to the re-order.

Particle size & formulation controlled, not pre-blended in drums

The luminous material is dosed into the coating at a controlled particle ratio, and that ratio is what sets the brightness and the decay curve. The published figures are a charge of 30 minutes and 6 hours of glow. Those numbers only hold if the pigment density stays even along the roll, because a thin spot at one position lights up differently from the rest of the web. We hold the density across the reel and check it on the finished web, not on the coating line.

An adhesive that bonds and still peels

Most products in this category manage one half of the requirement, either it grips and will not come off, or it lifts easily and never really bonds. Our transparent removable adhesive reaches both at once. The coating formula and the coat weight are controlled together, so the film holds firmly, sits flat without lifting at the edges, and comes away later without leaving glue residue behind.

Three glow lines on one coating system

Fine sand, coarse sand and fabric-backed are all produced inside our own coating operation. Delivery dates and batch consistency therefore do not depend on an outside supplier’s material supply or capacity. When the pigment, the adhesive and the base material all come from the same building, a second order of the same grade behaves the same way as the first.

Wide-web coating and slitting tension control

Every roll comes off the coater at the standard 1.27 m width and is slit to length under controlled tension with a matched release liner. The web keeps its flatness from that point on, and it does not take a memory of the roll. Damage of that kind starts where the material is cut without tension control, and it only becomes visible once the film is already on the floor.

Request Free Sample

Fine and coarse grain swatches · replies in 24h

No spam. Prefer email? Write to sale@labellet.com

BEFORE YOU QUOTE

FAQ

Straight answers on where to use each grade, how to choose between them, what testing sits behind them and how long they take to deliver.

1What are glow in the dark stickers actually used for?

Most of what we ship falls into four solutions. They are safety marking, facade and signage work, backup guidance for unlit spaces, and scenery for exhibitions. Municipal crossings, kerb edges and stair nosings use strips so the route still reads when the lighting fails, and transit underpasses and underground car parks use the same film behind the permanent lighting. Storefront and landscape work uses it for surfaces that look metallic by day and self-luminous by night. Exhibitions, theme parks and museums pair the foil range with washable fabric-backed film that gets changed often. Door numbers, risers and exit routes make up the smaller but steadier wayfinding share. In all of these the charging condition decides the result, because these films store light rather than generate it.

2How do I choose between the two sand-grain photoluminescent films?

Start with the surface, then the grain, then the duty. Rough cement, asphalt, wall brick and timber take the sand-face grades CP-3465 and CP-3466. The quieter one at 470+ µm keeps the surface flat, which suits directional marking where the graphic has to read clearly and the visual has to stay restrained. The bolder grain at 530+ µm throws more light back after dark and wears better, so it earns its place on warning zones and heavy-traffic areas. Neither grain changes the light output. If durability matters more to you than brightness, the 630+ µm heavy grade is the one we quote.

3What testing sits behind these photoluminescent films and stickers?

Slip resistance is rated R13 to DIN 51130 and flame behaviour is B1 to GB 8624, both verified by SGS. Water resistance, wear, antibacterial behaviour, mildew resistance and weathering are tested on the same build, and a RoHS report in Chinese and English covers the foil construction. Describe how the labels will be used, and we attach the certificates that apply to your quotation.

4What are the MOQ and lead time?

Standard grades need no material wait, so a proof is with you in 3 to 5 days and the finished rolls follow in 7 to 15. Longer schedules apply to the harder builds, and we confirm the date before the order is placed. Sample swatches of both grain grades go out with the quote, so you can judge the night effect on your own surface.

Still choosing between the two sand grades? Email sale@labellet.com with a photo of the surface and a note of where it will be mounted. We reply within 24 hours.

Send the Surface. Get the Grade in 24 Hours.

Where it goes, what it is stuck to, how much and how it is charged. We return the model, the coating thickness, the proof date and the price.

Request Free Sample
Email
WhatsApp
WhatsApp QR code
WeChat
WeChat QR code
Labellet Manufacturer
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.