☎ +86 13392540241 ✉ sale@labellet.com 🕒 26 yrs label experience  ·  ISO 9001 CERTIFIED

FOIL STICKERS · ALUMINUM FOIL · 315–800 MICRON

Custom Foil Stickers That Grip, Glow and Stay Put

From printable matte-white flat faces to coarse-sand anti-slip, glow-in-the-dark and washable fabric, all in 11 SKUs.

R13 anti-slip ratedB1 fire rated6 h glow per charge5-day fastest proofing

Labellet — Aluminum Foil Sticker Manufacturer in China

Labellet supplies aluminum foil sticker solutions to transit hubs (high-speed rail, metro and airports), city roads and plazas, malls, schools and car parks, door heads and nightscape lighting, exhibition sets and soft furnishings, industrial and vintage interiors, and outdoor advertising and wayfinding systems. Every build meets DIN 51130 R13 slip resistance, GB 8624 B1 flame rating, ISO quality management, RoHS compliance and SGS test requirements. The web is 1.27 m standard, rolls run 30 m as standard (50 m on CP-1246), and the 315 to 800 µm thickness band is held in stock as standard specs.

Four Layers Managed as One Spec Sheet

Every custom foil sticker we ship is the same four-layer build: print coating, aluminum-foil face, high-tack removable transparent adhesive and 140 g double-PE release liner. One spec sheet binds one incoming batch: thickness, peel and edge flatness are checked roll by roll, and mixed batches do not go into one roll.

Grit Size and Coat Weight Controlled in Pairs

On the sanded range, slip rating and looks both come down to two numbers: particle-size distribution and coating weight. We double-check mesh against coat weight before the run, screen the grit after blending, then sample across the full 1.27 m web so density reads the same at the edge as in the middle. Same roll, same grip, end to end.

Proof to Volume in 5–15 Days

Coating formulation, grit dispersion, glow-powder blending, wide-web slitting tension, liner release match and final inspection all run in one building, backed by climate-chamber, XRF, abrasion, tensile and ageing testers. A proof clears in 5–15 days from approval, and the standard gauges are held in stock ready for slitting.

If you are laying continuous lane-marking rolls rather than cut panels, start with our industrial floor marking tape range, glow-in-the-dark photoluminescent film, removable wall film for bedrooms and real production cases.

From Concourse to Courtyard

Foil Sticker Solutions by Application: Anti-Slip, Glow, Printable & Washable

Each route pairs the setting with the exact SKU, gauge and fixing note, so your foil sticker passes the site walk and not just the sample board.

A1 · Transit HubsAnti-Slip Foil Stickers for High-Speed Rail, Metro and Airport Floors

Wayfinding and warning marks in stations have to pass DIN 51130 R13 before anything else. Wet mops, rolling luggage and peak-hour crowds all land on the same strip of floor. The foil holds the print; the grit does the gripping. A rubber-mallet bed-down keeps the edges flat on granite and concrete.

  • Where it fits: platform edges, interchange corridors, gate queues, escalator landings.
  • Go-to build: CP-1246 matte-white (315 µm) cut into arrows and numbers for directions; CP-3511 coarse-sand (630+ µm) for warning blocks; CP-1050 all-round sanded for damp entries.
  • Why foil here: the metallic body reads against grey stone, the grit holds R13 with water on the surface, and the 1.27 m web covers wide lanes with fewer seams.

A2 · Streets and Public RealmWeatherproof Foil Stickers for Roads, Plazas and Outdoor Graphics

Paper and commodity vinyl chalk, curl and fade outdoors. Foil-faced construction does not. A UV-stable topcoat sits over a waterproof body that will not mildew. Where sweepers and tyres run over the mark, step up to the CP-2050 heavy band at 600–800 µm.

  • Pavement guides, plaza directories and car-park bays are the usual work here, and printed outdoor-ad overlays run on the same material.
  • Go-to build: CP-1050 sanded for general outdoor duty; CP-2050 heavy for vehicle crossings and machine-swept lanes.
  • Watch-outs: beds must be clean and dry; above 600 µm, plan machine lay-down for full contact.

A3 · Door Heads and NightscapeGlow-in-the-Dark Foil Stickers for Entrances and Night Guidance

CP-3465 coarse-glow and CP-3466 fine-glow faces take 30 minutes of daylight and return 6 hours of legibility. Daytime they are textured graphics; after dark they are the sign. Wash them with a spotlight and the halo doubles.

  • Night use: shopfront headers, night-trail markers, stair nosings, assembly-point signs.
  • Go-to build: CP-3465 where the grain should show at night and scuff is heavy; CP-3466 where the floor should stay visually quiet.
  • Note: glow life is rated per charge cycle, so keep a daylight or floodlit window in the maintenance plan.

A4 · Interiors and ExhibitionsPrintable Flat Foil Stickers and Washable Fabric Stickers for Fit-Out

Minimal white, brushed metal, anti-fingerprint silver, or a fabric-backed that folds around a prop. Interiors pick by eye first, then by hand. Flat faces print sharp and cut into kits; Fabric-backed survive the fold, the trim and the laundry bag.

  • Retail counters, reception desks and gallery walls are where the flat face earns its keep.
  • Go-to build: CP-1246 for pure-white print-and-cut kits; CP-1247 mirror silver for wipe-clean modern zones; CP-6051 silver lychee where fingers meet the surface; CP-4117 sanded fabric-backed where the graphic must fold or wash.
  • Why two bases: foil gives opacity and metal depth; Fabric-backed gives drape where foil would crease.

A5 · Industrial and Vintage DecorCoarse-Grain Foil Stickers for Walls with a Working Look

Some walls are meant to look rough. CP-3511 coarse-sand at 630+ µm throws an open, rugged grain and takes scuff better than anything else we make, the default for industrial and vintage schemes. CP-6051 silver lychee covers the zones the hand touches rather than the boot.

  • Room to work with: feature walls, loft partitions, back-of-house corridors dressed as decor, metal-clad columns.
  • Go-to build: CP-3511 for visible grain and maximum scuff resistance; CP-6051 for counters and hand-touch trims.
  • Fixing note: bed with a rubber mallet so the film maps every contour, with no bridging and no drumming.

A6 · Wet and Washdown ZonesWaterproof Foil Stickers for Bathrooms, Kitchens and Washrooms

Every aluminum-foil construction we make is waterproof and mildew-proof, with an antibacterial surface for frequent-touch public zones. That covers bathrooms, kitchen lines, WC pictograms and cleaner-dosed floors. Standing water and daily detergent wipe-downs do not lift a properly bedded edge.

  • Wet-duty note: washroom signage floors, kitchen pass lines, shower-adjacent graphics, damp corridors.
  • Go-to build: CP-1050 sanded general purpose; CP-6056 PET sanded where the floor is already smooth and the budget is tight.
  • Mop-friendly faces: CP-1247 mirror and CP-6056 PET wipe down fastest.

Need the glow-charge log or the R13 certificate behind a line? Ask for the SGS pack.

FIVE FAMILIES, ELEVEN SKUs

Pick Your Foil Sticker Family by Texture and Thickness

Sanded, glow, textured, flat or flexible. Each family below names its models, its gauge and the job it was mixed for.

510–800 µm

Sanded series — CP-1050 · CP-2050 · CP-6054

The workhorses of our range. Coating, foil and finish are identical across the three, so pick by load only: CP-1050 at 510 µm for everyday traffic, CP-2050 in 540 µm light / 600–800 µm heavy for impact and sweeper duty, CP-6054 at 565 µm where tearing, not wear, kills the sticker.

470–530+ µm

Glow-in-the-Dark — CP-3465 coarse · CP-3466 fine

Photoluminescent faces that charge 30 minutes in daylight and read for 6 hours after dark. Coarse CP-3465 (530+ µm) shows a bolder grain at night and scuffs less; fine CP-3466 (470+ µm) sits quieter underfoot. Both pair with spotlights on door heads and night guidance graphics.

600–630+ µm

Textured series — CP-3511 coarse sand · CP-6051 silver lychee

Decorative faces you can feel. CP-3511 at 630+ µm is the hardest-wearing one in the family. Open grain suits industrial and vintage walls. CP-6051 at 600+ µm presses a lychee grain into the film: more bite than a flat face, made for counters and touch zones.

315 µm

Flat series — CP-1246 matte white · CP-1247 mirror silver

The thinnest printable faces we stock. CP-1246 lays a high-opacity matte white that prints clean and cuts into arrows and bay numbers. Its 50 m roll is the longest of the family. CP-1247 keeps the bare-foil mirror, wipes clean and holds no fingerprints for modern interiors.

470–500 µm

Flexible series — CP-4117 fabric · CP-6056 PET

The two non-foil exceptions. CP-4117 bonds the sanded coating to a fabric-backed: it folds, trims and washes, the right answer for exhibition sets and soft-fit graphics. CP-6056 puts the anti-slip coat on PET film, giving honest grip on smooth flat floors at a working budget, easy to mop.

EVERY MODEL, GROUPED BY BUILD

Aluminum Foil Stickers Compared: 11 Models, 5 Constructions

Five constructions cover all eleven models. Grouping by build shows where the range differs and where it does not, so you can narrow to a family before you pick a gauge.

ConstructionModelsLinerThicknessWeb × lengthWhat the family is for
Sanded coat over foilCP-1050 · CP-2050 · CP-6054140 g double-PE liner510 / 540–800 / 565 µm1.27 m × 30 mThe all-round sanded family. Gauge sets the duty: CP-1050 for everyday traffic, CP-2050 for impact and sweeper lanes, CP-6054 where tearing is the risk.
Coarse or glow coat over foilCP-3511 · CP-3465 · CP-6051140 g double-PE liner630+ / 530+ / 600+ µm1.27 m × 30 mHeavy texture. CP-3511 is the most abrasion-resistant face we make, CP-3465 charges in daylight and glows for six hours, CP-6051 carries a lychee grain.
Anti-UV white coat over foilCP-1246 · CP-1247140 g double-PE liner315 µm1.27 m × 30 m / 50 mThe flat faces. CP-1246 prints and die-cuts into sign kits on the longest roll we ship, CP-1247 keeps the bare mirror and wipes clean.
Sanded coat over Fabric-backedCP-4117140 g double-PE liner470–500 µm1.27 m × 30 mThe one flexible foil-facing option: it folds, trims and washes, so it suits exhibition sets and soft-fit graphics.
Anti-slip coat over PETCP-6056140 g double-PE liner470–500 µm1.27 m × 30 mThe budget route to honest grip on smooth flat floors, and the easiest of the range to mop.

Eleven models across five constructions, all on a 1.27 m web with 30 m standard rolls. The nine aluminum-based models sit in the first three rows; the two non-foil options are at the bottom.

For the continuous-roll grades of the same constructions, and the paperwork behind the R13 and B1 claims, see our industrial floor marking tape, SGS test reports, certifications and quality control checkpoints.

BUILT AROUND YOUR FLOOR

Custom Foil Stickers in 8 Decisions

Answer these with our engineer and the quotation lands in one round, with no back-and-forth on missing roughness, load or strip plans.

01 · Texture first

Coarse sand, fine sand, lychee grain, sanded glow or mirror silver cover the full hand-feel spectrum from rugged to satin. Grit density and pile height are set per project and held constant across the roll once signed off.

02 · Thickness next

Total gauge runs from thin print-and-cut stock to the heavy-duty end. Tensile and tear strength track thickness, so traffic load picks the gauge, not glue. Both gauges leave the same coating line.

03 · Adhesive system

High-tack removable transparent adhesive as standard, plus SOL water-based eco, LATEX, UV-cure and ECO systems by substrate and strip frequency. Stick hard and peel clean, with the balance point settable per job.

04 · Print and cut

CP-1246 matte-white flat foil takes print sharply and die-cuts into arrows, numbers and lane kits. The 50 m roll length cuts kit waste on corridor-length runs.

05 · Function pack

Six ratings can be combined: waterproof, abrasion, B1 fire, antibacterial, R13 slip and weather resistance. Glow duration and charge speed are tunable. One SKU, six ratings, SGS-backed, so there is no second sourcing to arrange.

06 · Build and pack

Total gauge 315–800 µm; liner weight (140 g double-PE standard), adhesive (SOL / LATEX / UV / ECO) and face (foil / Fabric-backed / PET) all configurable. Slit and packed to your laying method, 30 m standard, 50 m on CP-1246.

07 · Fire and hygiene

B1 to GB 8624 for built interiors; antibacterial-treated faces for high-touch public contact; mildew-proof for humid duty.

08 · Lay-down method

Hand roller or squeegee for standard gauges; rubber-mallet bed-down for contour mapping; machine lay-down recommended past 600 µm.

TESTED PERFORMANCE, NOT BROCHURE CLAIMS

How Our Metallic Foil Stickers Test

Slip, fire, water, wear and glow. Each line below is a lab or line record you can ask for by name.

PropertyTest Standard / MethodLabellet Typical Value
Slip resistanceDIN 51130 rampR13, passes station / metro / airport gate review
Fire ratingGB 8624B1, building-interior compliant
WaterproofingStanding-water + rain exposureFoil range waterproof; edges stay bonded
Heat resistanceSGS heat-resistant foil reportFilm and coating rated for heat-exposed indoor zones
Mildew resistanceHumid-heat ageingNo mold growth on foil faces
Antibacterial faceHigh-touch contact protocolTreated surface, public-zone rated
Abrasion, sanded rangeWear tester, SGSCP-3511 highest in the sanded range; CP-2050 heavy band for sweeper lanes
Tear strengthTensile / peel testerRises with gauge; CP-6054 extra-tough at 565 µm
Glow cycleCharge / afterglow log30-min charge → 6-h legibility (CP-3465 / CP-3466)
Weather resistanceUV + rain cyclingIndoor / outdoor rated, long service life
Peel and stripPeel-force + residue checkHigh tack on lay-down, clean strip on removal
ConformabilityRubber-mallet bed-downMaps substrate contour and grain, no edge lift
Liner release140 g double-PE linerStable release, flat lay, roll-to-roll consistency

Need the full lab sheet behind a line? Email sale@labellet.com with your substrate, traffic and glow window. We reply within 24 hours.

For printable, washable and sanded faces outside the glow grades, see our full foil sticker families, foil sticker production cases and how we verify adhesion and abrasion.

WHY LABELLET FOR FOIL

Why 1000+ Clients Trust Us

Five textures and eleven gauges under one roof, plus the habits that keep removable foil honest.

Wide-web slitting under tension control

Web tension on a 1.27 m slitter decides whether the face lies flat weeks later. Tension is set per run and held, so a roll you slit today still lays down flat after a season of traffic.

140 g double-PE liner, release matched

The liner decides how the film peels and how it lays. We match release force to the coat weight, which is why a removable sticker still beds flat under a roller and strips without residue.

SGS reports you can ask for by name

Anti-slip, wear, flame and antibacterial results sit in the file with the model number, not in a generic brochure. Quote the model, and the sheet comes back with it.

Honest dates, quoted up front

Standard gauges hold a 5–15 day window. Glow and heavy-gauge runs get their real lead time stated on the proposal instead of a guess.

Request Free Sample

Free swatch pack · replies in 24h

No spam. Prefer email? Write to sale@labellet.com

Success stories

Proven on Floors, Walls and Door Heads

Three builds: transit signage, night-trail glow and industrial decor, each shipped with lay-down proof and test backup.

Transit Interchange Signage — Flat + Coarse-Sand Foil Stickers

Transit Interchange Signage — Flat + Coarse-Sand Foil Stickers

High-speed rail interchange · grey granite floors

Customer
Transit-hub fit-out contractor in China (station concourse and interchange corridors).
Product Requirements
White matte direction lanes plus sanded warning blocks on polished stone, R13 gate requirement.
Material Structure
CP-1246 matte-white flat face (315 µm, cut arrows and bay numbers) + CP-3511 coarse-sand warning blocks (630+ µm) + transparent removable adhesive.
Compliance
DIN 51130 R13 · SGS anti-slip / heat report.

What we finally produced:

  • R13 slip rating holds with surface water present.
  • Cut-arrow kits slit from the 1.27 m web with matched grit density down the roll.
  • Rubber-mallet bed-down maps the granite grain, with no bridged edges and no drumming.
  • White lanes stay printable and scuff-readable under rolling-luggage traffic.

Final Delivery: Artwork + cut kit + laid proof + SGS anti-slip report + peel and edge-flatness record.

Shopfront Night Trail — Glow Foil Stickers under Spotlights

Shopfront Night Trail — Glow Foil Stickers under Spotlights

Retail street door heads · dusk-to-close trade

Customer
Commercial-street operator in China (door heads and night-guide graphics).
Product Requirements
Coarse-glow door-head marks readable by day as texture and by night as light.
Material Structure
CP-3465 coarse-glow face (530+ µm, 30-min charge / 6-h glow) + spotlight wash.
Compliance
In-house glow-cycle log · B1 fire backup for interior returns.

What we finally produced:

  • 30-minute daylight charge returns 6 hours of night legibility.
  • Coarse grain reads as decor by day, as signal by night.
  • Heavier 530+ µm face resists scuff at threshold lines.
  • Spotlight wash specified in the lighting plan, not left to chance.

Final Delivery: Artwork + glow-cycle proof + laid night photo + charge / afterglow log.

Industrial-Grade Feature Wall — Coarse-Sand Foil Stickers

Industrial-Grade Feature Wall — Coarse-Sand Foil Stickers

Loft retail unit · concrete and metal cladding

Customer
Interior fit-out studio in China (industrial-style feature wall and column wraps).
Product Requirements
Full-height coarse-sand foil sticker drops with open rugged grain and metal depth.
Material Structure
CP-3511 coarse-sand at 630+ µm + rubber-mallet contour bed-down.
Compliance
SGS wear / antibacterial backup · GB 8624 B1 where code requires.

What we finally produced:

  • Trolley and boot scuff leave the grain intact, with no polishing of the edge.
  • Open grain and foil depth carry the industrial look without paint.
  • Mallet bed-down follows panel joints and rivet lines with no lift.
  • B1-rated path available for enclosed interior returns.

Final Delivery: Artwork + grain proof + laid wall proof + wear and fire backup reports.

BEFORE YOU QUOTE

FAQ

Straight answers for buyers, designers and site crews.

1How do I choose between sanded, flat, textured, glow and flexible faces?

Work in order and each answer narrows the next: substrate roughness first, traffic load second, look third, flexibility fourth, lay-down fifth. Rough cement, asphalt or wall tile points to sanded or coarse-sand (CP-1050 / CP-2050 / CP-6054 / CP-3511); smooth flat floors point to PET (CP-6056) or flat foil (CP-1246 / CP-1247). Load then picks the gauge; look picks the face; fold-or-wash switches the base to Fabric-backed CP-4117.

2Will these survive outdoors?

The nine foil-base SKUs are built for it: aluminum face, UV-stable topcoat, waterproof and weather-rated body, 30 m rolls off the 1.27 m web. For tyre and sweeper lanes, specify the CP-2050 heavy band at 600–800 µm and lay it by machine.

3What artwork do you need for custom foil stickers?

Vector files with outlined fonts, 3 mm bleed and a cut layer: AI, PDF or CDR. For sign kits, send the arrow / numbering schedule; for glow work, mark which panels charge by daylight and which by floodlight. Prepress checks printability and cut paths before proofing.

4What is the MOQ and lead time?

Stocked 315–800 µm constructions start at small proof quantities, with volume in 5–15 days from proof approval. Cut kits (CP-1246 arrows and numbers) and slit widths follow your laying plan. The web is 1.27 m, rolls are 30 m, and CP-1246 runs to 50 m.

5Can foil stickers be printed and cut into custom shapes?

Yes, on CP-1246. The matte-white flat face takes print cleanly and die-cuts into arrows, bay numbers and lane kits, and the 50 m roll length cuts kit waste on corridor-length runs. Send the artwork with outlined fonts and a cut layer, plus the numbering schedule, and prepress checks both before proofing. The sanded and glow faces are cut only, not printed.

6How long does the glow last, and how often does it need charging?

A full daylight charge of 30 minutes gives you about 6 hours of legibility, and the cycle repeats each time the material takes light. Performance fades gradually rather than switching off, so signs are usually still readable at the tail of the cycle. In an interior with no daylight, plan a floodlight or UV charge window into the maintenance round rather than relying on ambient light.

Send Your Floor Plan. Get a Matched Foil Build in 24h.

Substrate, traffic, glow need and quantity. We return family, gauge, proof date and price.

Request Free Sample
Email
WhatsApp
WhatsApp QR code
WeChat
WeChat QR code
Labellet Manufacturer
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.