CASES · PROOF
Labels That Solved It
Real jobs, real specs — how we matched the stock, the process and the QA to each brief.
CASE 01 — FOOD & BEVERAGE
Chili Sauce Label: Window, Cold Foil & Matte.
Transparent BOPP with a see-through window, hollow silver cold-foil lines and zoned matte varnish — brand color held with spot ink.

What the client asked for
- Open window in the middle — the jar and its own logo show straight through the label after application.
- Transparent look — silver metallic effect only as hollow lines / patterns, never blocking the display area.
- Logo stays clean — nothing printed or foiled over the see-through logo zone.
- Zoned matte varnish — matte-vs-gloss contrast to lift the logo and pattern layers; silky, non-reflective finish.
- True, stable color — full saturated graphics, brand color in spot ink, no shift from the clear film or jar contents.
- Built for wet shelves — waterproof, moisture-proof transparent film that resists rubbing (food / daily-chemical use).
How we built it (face to liner)
- Face: transparent BOPP 50–60μm, corona-treated for cold-foil paste & ink adhesion.
- Finish: zoned matte varnish (screen or flexo) — logo zone left clear / glossy for contrast.
- Print stack (top-down): spot + CMYK over a white base over cold silver — white sits above the foil, below the color, so graphics stay true.
- Adhesive: clear permanent pressure-sensitive adhesive — no haze, window stays crystal.
- Liner: glassine, ready for auto-labeling.
Press flow
Prepress split: cold-foil / white / color (CMYK + spot) / zoned-matte / die plates on one registration datum → hollow silver cold foil (logo zone skipped) → white base on graphics only, 2 passes for opacity → CMYK + spot (Pantone matched, ΔE ≤ 2) → zoned matte varnish → one-pass die-cut: inner window + outer profile, ±0.2 mm.
| Risk | Our control |
|---|---|
| Foil / white / color / die misregister | Single datum + inline register control, ±0.2 mm |
| Weak white = color shift | White printed twice, controlled ink film + cure |
| Cold foil lifting | Corona ≥ 38 dyn + primer / back-coat |
| Window burrs, logo-zone contamination | Sharpened die, logo zone masked from ink & glue throughout |
| Matte varnish misregister | Widened varnish bite, controlled UV-cure shrinkage |
| Bubbles / haze on application | Clear adhesive + auto-label venting design |
CASE 02 — ELECTRONICS & POWER
Battery Label: Green, Flame-Retardant & Reprintable.
Green-and-white insulation film — crisp register, reprintable and scuff-proof surface, flame-retardant and heat-proof for battery safety (UL94 V-0).

What the client asked for
- Pure, stable green — white base under the green for accurate, saturated, batch-stable color.
- Flexible small-medium runs — fast changeovers, short lead times, tight register.
- Flame-retardant & self-extinguishing — meets battery safety practice (UL94 V-0).
- Insulation-film face — heat-resistant, insulating, flame-retardant, self-adhesive and firmly bonded.
- Reprintable surface — accepts thermal-transfer / UV inkjet overprint; overprint stays sharp and scannable.
- Tough in handling — scratch- and rub-resistant, no ink loss in transport and assembly.
- Chemical-proof — resists electrolyte, acids, alkalis and salt spray; no fading or delamination.
- Heat-stable 120–150℃ — no shrinkage, edge lift, adhesive failure or discoloration.
- Electrically safe — solid insulation and breakdown resistance, no short-circuit / fire risk.
How we built it (face to liner)
- Face: battery insulation film (PET insulation / polyimide PI / barley paper by temperature class, 50–100μm) — flame-retardant, heat-resistant, insulating.
- Finish: UVF abrasion-resistant printable varnish (matte or gloss) — accepts thermal-transfer ribbon / UV inkjet overprint.
- Ink: white base + spot green — white guarantees true green.
- Adhesive: flame-retardant acrylic (≤ 130℃) or silicone (≤ 200℃) — high heat, high holding power, no residue.
- Liner: glassine / PET, semi-rotary die-cut, roll format for auto-labeling.
Press flow
Prepress split: white / green / varnish / die plates on one datum → white base, 2 passes for coverage without breaking insulation → spot green (safety green matched, ΔE ≤ 2) → full UVF printable varnish, fully cured, surface energy tuned for overprint → semi-rotary die-cut ±0.2 mm → roll-packed by applicator direction with batch test report.
| Risk | Our control |
|---|---|
| Flame rating fails | Flame-retardant face + adhesive (UL94 V-0); burn test sampled every batch with report |
| Heat shrinkage / lift / ooze | Glue matched to duty (acrylic ≤ 130℃ / silicone ≤ 200℃); aged e.g. 150℃ / 2h |
| Electrolyte / salt-spray attack | Ink chemical-resistance tests (24h electrolyte soak, 48h salt spray); varnish-sealed |
| Insulation breakdown | Breakdown-voltage test (≥ 2 kV); white / ink layers must not compromise film insulation |
| Weak overprint adhesion | Varnish surface-energy control; 3M-tape + rub test after ribbon / inkjet print |
| Two-color misregister | Semi-rotary ≤ 0.15 mm; widened white plate bite |
| Dull green from weak white | White printed twice, coverage ≥ 95% |
| Batch-to-batch drift | Approved material vendors, per-batch reports, retained reference samples |
Have a tricky label? Send the brief — we reply within 24 hours.
Unsure which material or process suits your product? Get free samples.
A curated sample pack — Label, foil & vinyl — ships free in 48 hours. Feel the difference before you order.

