☎ +86 13392540241 ✉ sale@labellet.com 🕒 26 yrs label experience  ·  ISO 9001 CERTIFIED

INDUSTRIAL FLOOR MARKING TAPE - 510-800 MICRON, R13 / B1

Industrial Floor Marking Tape: Mark and Grip in One Pass

7 stocked rolls cut to your aisle width, with grip built in.

R13 slip resistanceB1 fire rating6 h glow per charge510–800 µm stocked band

Labellet — Industrial Floor Marking Tape Manufacturer in China

Floor lines fail two ways. Print wears off under pallet wheels, and smooth slabs turn slick once oil and water film over. Paint plus mats only makes it worse: two materials, two wear lives, one blurred mess. Our tape fixes both in one layer with a foil or PET base, anti-slip grit and removable adhesive. Lines, zones, warnings and grip wear together, and relaying means peeling a strip instead of grinding the floor. So how do we do it?

Heavy Duty Floor Marking Tape with R13 Grip and B1 Fire Rating

Our heavy-duty lane tape holds an R13 slip rating. The same roll also stands up to water, abrasion, B1 fire, bacteria and weather because audits rarely test one thing at a time, and a lane that passes slip but fails fire still fails. One spec covers warehouses, plants, garages, distribution hubs and cold-chain docks.

Removable Floor Marking Tape for Concrete and Epoxy

Foil or PET face, anti-slip grit and removable high-tack glue leave the line as one tape, so aisle lines, zone borders, warning marks and grip wear at the same pace. Roll it down and it follows the floor grain. The original floor still shows through. Site managers ask for that before they sign.

Three Bases in Stock: Foil, PET and Fabric-backed

Foil stretches over rough cement, asphalt and joints. PET film is the budget fix for flat epoxy and tile, while Fabric-backed folds and washes where foil would crease. We coat, slit and stock all three in-house. Send a floor photo and the pick is usually settled in one email.

APPLICATIONS

Where Floor Marking Tape Works: Lanes, Oil, Warning and Cold Rooms

Each fix below names the exact SKU and how we lay it. A straight edge, no lifted corners and no broken line after forklifts pass is what passes the walk.

LanesWarehouse Aisle Marking Tape That Relays Without a Shutdown

Main aisles, walkways, truck routes, picking faces and staging squares all take the same sand-face foil, slit to your lane width. Width stays true down the run and edges cut clean, because a wavy line fails an audit before a wheel ever touches it. One finished length reopens to traffic while the crew lays the next, and when the route changes the whole strip peels up with no residue. Relay happens without grinding dust or waiting on paint to cure.

  • Typical pick: CP-3511 coarse 630+ µm or CP-2050 heavy 600–800 µm for main lanes; CP-1050 general 510 µm for walkways; CP-6056 PET 470–500 µm for smooth floors.

Oily and Damp SlabsAnti-Slip Floor Marking Tape for Oily and Damp Slabs

Machine shops, assembly lines and docks collect oil, mist and rain. Mats soak through and fail, and that is usually when someone finds out dry-feel grades mean nothing. Our grit-in-coat tape keeps grip because the grit sits inside a waterproof coat, and we pick it by the DIN 51130 oil-wet ramp angle. Thicker oil needs coarser grit, so tell us the oil type and we match the test record instead of guessing.

  • Fits machine aisles, assembly lines, dock plates and spill corners.
  • If the slab powders under a thumbnail, fix the slab first.

Night Safety RoutesGlow Floor Tape for Night Routes and Muster Paths

Fire lanes, panel keep-clear boxes, hazmat bays and truck crossings get cut from yellow-black or red-white sand-face tape. One strip warns and grips at the same time and carries a B1 rating. For night shifts the coarse-glow stock joins the same system. Charge it before the shift and lanes still read when the lights go out, but keep glow to escape legs and crossings. Lighting a whole hall in photoluminescent stock wastes money.

  • Striped tape for hazards plus CP-3465 glow 530+ µm for dark lanes.
  • Color, grip and B1 in one SKU, with SGS sheets to back it.

Cold RoomsCold Store Floor Marking Tape That Holds Below Freezing

Cold rooms sit frosted for months. Standard glue gives up near minus 18 there, and edges lift while the room still looks fine. Cold-duty CP-2050 runs a cold-weather glue on a tougher base. Clear the frost, lay at 10 °C or above, and let the bond set before the room pulls back to frost. Skip the defrost step and even the right glue will let go.

  • CP-2050 with cold-weather glue for chill lanes and docks.
  • Send room temp and relay plan up front. Cold changes glue and base both.

Ramp-angle record or SGS sheet needed for the audit file? Ask for the test pack and quote the SKU.

SPEC SHEET

Floor Marking Tape Spec Sheet: 7 Models by Gauge and Base

Gauge, build and home ground for each stocked roll. Foil, PET, Fabric-backed and glow on one sheet. Widths 25 to 100 mm off a standard 1.27 m web.

ModelPositioningConstructionGaugeSuitsCore use
CP-2050Heavy-duty foil, all-roundFoil + PE + transparent removable adhesive · 140 g double-PE liner600–800 µmAsphalt, brick, uneven cementMax conformability; first choice for broken slabs
CP-1050General lane foilSand coat + foil · 140 g double-PE liner510 µmCement, wall brick, metal, rough facesStandard lane and bay marking
CP-3511Coarse-sand foil, wear leaderSand coat + foil · 140 g double-PE liner630+ µmRough faces, truck turning zonesLongest life under wheel traffic
CP-6056PET sand film, budgetPET + anti-slip coat · 140 g double-PE liner470–500 µmEpoxy, tile, sealed smooth floorsLowest cost per metre for flat slabs
CP-6051Textured foil, touch zonesCoarse coat + foil · 140 g double-PE liner600+ µmEquipment plinths, touch trimsGrain finish for hand-contact areas
CP-4117Fabric-backed, soft-fitSand coat + Fabric-backed · 140 g double-PE liner470–500 µmWall brick, raw cementFor folds, corners and wash-down kits
CP-3465Glow foil, night legsPhotoluminescent coat + foil · 140 g double-PE liner530+ µmCement, metal, rough faces30-min charge / 6-h glow; escape paths only

CUSTOM BUILD

Custom Floor Marking Tape in 6 Decisions

01 - Grit size

Coarse, medium or fine. Because bigger grit lasts longer but looks rougher, truck lanes and showrooms almost never take the same grade, and we flag it when they try.

02 - Gauge and width

510 to 800 µm covers light, standard and heavy duty. Odd widths are checked against the coating line first.

03 - Adhesive recipe

Tack, hold and removability are set per job. How long does the mark stay, and will you relay it? Those two answers decide the recipe.

04 - Colors

Yellow-black and red-white for hazards, blue, green and grey for lanes. Color hold is confirmed before volume because washdown fades cheap pigment first.

05 - Low-temperature recipe

Cold rooms get cold-weather glue on a tougher base. Running at frost and did not say so? Flag it now, the standard glue is not quoted there.

06 - Roll length

Length follows your take-off to cut waste. Whole-warehouse relays are packed lane by lane for staged work.

TEST METHODS

Test Standards We Quote on the Order

One B1-rated build covers water, wear, bacteria and weather, and SGS sheets ride in the carton. We quote by measured angle and stated class, never by feel.

PropertyStandard / MethodHow we apply it
Slip, shoe trafficDIN 51130 ramp test for work areas with slip riskThe oil-wet angle picks the SKU. Dry-feel grades never go to oily shops.
Slip, barefoot wet zonesDIN 51097 for wet barefoot areas like pools and showersOnly for clean-water zones such as washrooms.
FireGB 8624 B1, matches EN 13501 B-s1,dB1 covers warning and lane lengths, not a whole roll acting as a fire barrier.
Quality systemISO management-system rulesEach batch traces from coat to slit, so a reorder matches the first lot.
Restricted substancesRoHS limits on hazardous substancesRegulated sites get the substance sheet on request.

For one line of the table, email sale@labellet.com with slab finish, oil exposure and temperature. We reply within 24 hours.

SELECTION GUIDE

Which Tape for Which Floor

Find your floor on the left and read across for SKU and laying note. A photo of the slab settles most picks before proofing.

Ground / JobRecommended SKUHow we lay it
Main aisles and truck lanesCP-3511 coarse-sand foil · 630+ µmCut to lane width. The toughest face we make for constant wheels.
Walkways and light zonesCP-1050 sand-face foil · 510 µmPicking faces, staging squares and partitions take this grade most weeks.
Flat smooth slabsCP-6056 PET sand film · 470–500 µmEpoxy and tile stay cheapest on PET, and it mops clean.
Rough slabs and asphaltCP-2050 heavy foil · 600–800 µmStretchy foil settles into dips where stiff film would bridge.
Cold rooms and docksCP-2050 plus cold-weather glueIt still bonds after the room drops back to frost.
Dark lanes and muster pathsCP-3465 coarse glow · 530+ µmHalf an hour of light, then readable lanes all night.

Where the same R13 grades appear as cut panels, and the vehicle film that shares our slitting line, see our aluminium foil sticker families, bus wrap vinyl, SGS anti-slip test reports and certifications.

FROM THE FACTORY

Why Factories Relay Their Lanes With Us

Coated, slit, and packed in-house. Three bases in stock. Every roll ships with its test papers.

Fire and slip papers ride with the roll

B1 and R13 documents ship inside the carton. Water, wear, antibacterial and weather cover come on the same build. That saves the second sample round most plants expect.

Floors are never flat, so we lay like it

Rubber mallet, firm pressure, and the foil maps crowns, rises and joints without lifted edges. The look holds because the fit holds.

Lines and grip age as one

When the lane and the anti-slip are the same roll, there is only one wear clock to watch. Paint plus mats always gave you two.

Request Free Sample

Free swatch pack, replies in 24h

No spam. Prefer email? Write to sale@labellet.com

COMMON QUESTIONS

FAQ

Short answers on slab, traffic, and relaying.

1How thick should our lanes be? We run pallet jacks daily.

For daily pallet-jack traffic, CP-3511 coarse at 630+ µm on the main runs and CP-2050 heavy at 600 to 800 µm where trucks turn will outlast anything thinner, while walkways and picking faces are fine on CP-1050 at 510 µm and smooth epoxy or tile takes CP-6056 PET at 470 to 500 µm. Send axle load with daily passes and we will name the gauge before quoting, because guessing by price is how lanes get relaid twice.

2Can we relay without stopping work?

Yes. We lay strip by strip so one length reopens while the next goes down, and the removable glue lets old strips peel clean. No grinding, no waiting on paint.

3Can one strip warn, grip and pass fire at the same time?

Yellow-black and red-white sand-face strips do both, grit plus B1 in one length. One caution from the shop: keep glow tape to escape legs and crossings. Covering a whole hall in photoluminescent stock is the most common way to overspend on this page.

4Cold store at minus 20, will standard tape hold?

No. Standard glue lets go near minus 18 while the room still looks fine. Cold-duty CP-2050 runs a cold-weather glue on a tougher base, laid on defrosted slab at 10 °C or above until the bond sets. Tell us dwell temp and relay frequency and we will confirm the recipe in writing.

Get Your SKU in 24 Hours.

Slab finish, traffic, lane widths and temperature. Send the details and we return SKU, gauge, proof date and price.

Request Free Sample
Email
WhatsApp
WhatsApp QR code
WeChat
WeChat QR code
Labellet Manufacturer
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.