☎ +86 13392540241 ✉ sale@labellet.com 🕒 26 yrs label experience  ·  ISO 9001 CERTIFIED

SUPPORT · FAQ

Frequently Asked Questions

Factory, MOQ, samples, lead times, customization & payment — everything buyers ask before ordering from Labellet.

70,000㎡ modern plant21 yrs label experience100 pcs low MOQ24h sample dispatch

GOOD TO KNOW

Answers Before You Order.

Click a question to expand the answer.

Are you a trading company or a manufacturer?

Labellet is a manufacturer — not a middleman.

We operate a 70,000 m² modern production base backed by 21 years of label & vinyl manufacturing experience. Printing, foiling, die-cutting and QA are all done in-house, so quality, cost and delivery stay fully under our control.

70,000㎡ plant21 years printingIn-house QA
What is your MOQ?

MOQs start as low as 100 pcs.

Different label products carry different MOQs, but we keep thresholds low to serve every customer — short runs from 100 pcs up to millions of pieces for bulk programs. Tell us your quantity and we will match the most economical plan.

From 100 pcsShort runs OKBulk to millions
Are samples free?

Yes — sampling and proofing are free.

We proof on an HP Indigo 6K digital press, so your free sample matches mass-production color — spot colors or multi-color CMYK alike. Just send your artwork and we will arrange proofing right away.

Free proofingHP Indigo 6KSpot + CMYK
What is your lead time?

Samples ship in 24 hours; bulk orders in about 7 days.

Need it fast? Samples printed on our HP Indigo 6K digital press ship within 24 hours. For bulk runs we schedule production around your quantity — typically completed and shipped in about 7 days, by sea or air freight arranged in advance.

24h samples~7-day bulkSea / air freight
Do you accept full customization?

Yes — if you can draw it, we can print it.

With 21 years serving brands worldwide, we handle even the most complex label, process and material combinations. Send your ideas and artwork files — a specialist will work through every detail with you and confirm a concrete execution plan, so the finished job matches your requirements 100%.

Any shapeAny finishDedicated specialist
What are your payment methods and terms?

T/T bank transfer — 50% deposit, 50% before shipment.

We trade by bank transfer (T/T). After confirming your order we issue a PI: 50% deposit before production, with the remaining 50% settled before shipment. Clear terms, no surprises.

T/T transfer50/50 termsPI issued
What performance ratings does the aluminum foil sticker achieve?

R13 slip resistance, B1 flame retardant and full RoHS compliance.

Slip resistance is R13 to DIN 51130 (oil-wet ramp method) — DIN grades floors from R9 to R14, so R13 sits in the higher band and stays safe to walk both dry and wet, which suits areas with liquid spill or routine wet cleaning. Flammability is B1 (difficult to ignite) to GB 8624, the grade required for decorative flooring and wall materials in public buildings. Peel strength is ≥ 4.0 N/25 mm on stainless steel after 24 h with the high-tack removable adhesive, initial tack is ≥ 4.0 N/25 mm for immediate positioning, and shear holding power is ≥ 24 h at 23 ℃ / 50% RH. The film also passes water resistance, abrasion, weathering, anti-mould, antibacterial and anti-static testing, with all ten RoHS items reported as N.D. under test report U03702260331611Z.

R13 · DIN 51130B1 · GB 8624Peel ≥ 4.0 N/25 mmRoHS all N.D.
What are the installation and service conditions for aluminum foil stickers?

Lay on a clean, dry substrate between 10 ℃ and 79 ℃ — and press the grit in.

The substrate must be clean, dry, free of oil and dust; porous or rough surfaces such as concrete, mortar and brick need sealing first, otherwise the adhesive is absorbed into the base and the bond fails. Lay the film along the drainage slope or the main traffic direction, starting 12 mm away from step edges, trench edges and wall-to-floor junctions so the edges are not lifted by shear. Rolling it down with a press roller or soft rubber mallet is what actually creates the friction surface: grit must be driven into the pores of the substrate, and film that has not been compacted cannot reach the R13 performance in wet conditions. Keep the area clear of traffic and cleaning for 24 h after laying so the adhesive stabilises. Below 10 ℃ the initial tack is insufficient and the base must be heated or the work deferred; continuous exposure above 79 ℃ is not suitable. Storage is 22 ± 2 ℃ and 50 ± 10% RH with a 3-year shelf life. Adjacent areas on the same wall or floor must come from the same roll or batch to avoid visible colour steps, and because the removable design does not apply to a long-term bonded film, temporary markings that need periodic replacement should be specified as a different product.

10–79 ℃ working rangePrime porous baseCompact the grit24 h no trafficStore 22 ± 2 ℃ / 50 ± 10% RH3-year shelf life

Still have questions? Email sale@labellet.com or call +86 13392540241 — we reply within 24 hours.

Unsure which material or process suits your product? Get free samples.

A curated sample pack — Label, foil & vinyl — ships free in 48 hours. Feel the difference before you order.

Request Free Sample
Email
WhatsApp
WhatsApp QR code
WeChat
WeChat QR code
Labellet Manufacturer
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.