☎ +86 13392540241 ✉ sale@labellet.com 🕒 26 yrs label experience  ·  ISO 9001 CERTIFIED

CUSTOM PRINTED VINYL WRAP · PROJECT-SPECIFIED BUILD

Custom Printed Vinyl Wrap — Face, Gauge, Adhesive, Liner, Width

Calendered printable PVC specified to the job, not to the shelf. Send the substrate, the service life and the panel size; we return the build sheet and the price.

85–180 μm total caliper6 Options for project1 roll minimum orderSOL / ECO / UV / LATEX printable face

Labellet — Professional Custom Printed Vinyl Wrap in China

Labellet manufactures custom printable vinyl wrap on calendered PVC. The face is corona-treated and surface-coated, so ink anchors into the film instead of sitting on top of it. The finished face runs on SOL, ECO, UV and LATEX press equipment without a change of settings.

Everything else is configured against the project rather than taken from a catalogue. Face caliper, adhesive colour, tack grade, release-liner grammage, liner texture and finished width all turn on three questions: how long the graphic stays down, what it has to hide, and how it comes off later.

  • AdhesiveClear, white, grey or black glue colour, in removable and high-tack removable tack grades.
  • Release linerSingle PE at 100, 120 or 140 g/m², with a diamond-embossed or flat surface texture.
  • Caliper & width85–180 μm total thickness. Stock widths of 0.914, 1.07, 1.27, 1.37 and 1.52 m, standard roll length 50 m.

Built for the first roll, not only for the tenth. Adhesive coating, emboss transfer, slitting, rewinding and packing all run on our own equipment. A specification starts at a single roll, enough for a trial, a proof or a first campaign order, and carries the same construction into the bulk run.

CUSTOMISATION OPTIONS

What Customization Options Are Available for the Vinyl Wrap?

The face, the caliper, the adhesive, the release liner, the laminate and the colour base can each be set on the same coating and slitting lines. The note inside each card gives the variable that decides it, so a specification can be settled before a price is asked for.

01

Face-stock & surface

Custom face-stock, gloss level and base colour

  • Resin system: monomeric or polymeric. Set by service life and the climate the film will live in. Polymeric for vehicle bodies and facade work on multi-year exposure, monomeric for exhibition graphics and shorter-life indoor campaigns.
  • Surface gloss: gloss, matt, fine matt or coarse matt. Gloss carries the main image and reads at distance. Use matt when the copy is read close up or lit by shop lighting from the front.
  • Base colour: white or clear. White with a white or grey adhesive, clear with a clear adhesive for glazing and any substrate where light has to pass through.
  • Face-stock and surface finish are made to the job. The print surface follows the substrate, the service life and the artwork, not a standard roll.
02

Caliper (total thickness)

Custom total thickness, 85 μm to 180 μm

  • 85 μm: narrow, shaped and compound-curve areas where conformability matters more than stiffness.
  • 110–130 μm: the general working range, from small signage through to flat panel work.
  • 140–160 μm: rough walls, corrugated box bodies and large flat planes with little backing support.
  • 180 μm: maximum stiffness for oversized flat installations where site support has to be minimised.
  • Caliper adds stiffness and removes conformability. Set it against the geometry of the substrate.
  • Thickness is cut to the panel, not chosen from a gauge table. The same order can run at one gauge on the flats and another on the shaped details.
03

Adhesive

Custom adhesive colour, tack grade and service cycle

  • Adhesive colour: clear, white, grey or black. Decided by substrate colour and how much hiding power the job needs.
  • Tack grade: removable, high-tack removable, semi-permanent or permanent. Set by how long the graphic stays down and whether a complete removal is required at the end of the cycle.
  • Adhesive colour sets hiding. Tack grade sets how the film comes off later. Specify both and the removal plan is known in advance.
  • Glue selection governs both the appearance on day one and the condition of the substrate on removal day. It is settled at specification stage, because the adhesive is already on the coil by the time the press starts.
04

Liner

Custom liner type, grammage, cutting and delivery

  • Liner type: single-PE flat, single-PE diamond-embossed, or PET. Embossed structure for large-area application, flat for fine artwork and close viewing.
  • Liner grammage: 100, 120 or 140 g/m². Heavy for wide-format spreading, light for narrow rolls and frequent changeovers.
  • Cutting: slitting to the ordered web width, register marks reserved, contour die-cutting to your drawing.
  • Delivery form: full rolls or slit lengths, matched to the press width and the consumption plan.
  • Packing: core inner diameter, outer carton, roll label, barcode and pallet, built to your specification.
  • A custom liner also means a custom delivery format: the roll can be slit, marked and packed to fit the way your press is loaded.
05

Overlaminate

Custom laminate: B-1013 gloss / B-1014 fine matt

  • An optional second layer for scratch resistance, UV stability and survival on the alkaline chemistry of a wash line.
  • B-1013 (gloss) and B-1014 (fine matt) cold laminates come from the same coating and laminating system as the film itself. The bond between film and laminate is verified under the same conditions.
  • Laminate improves the surface. It does not improve the adhesive. If the substrate is the problem, a laminate will not fix it.
  • Where the film is made to order, the laminate is specified with it and laminated in the same pass. Film and laminate arrive as one tested structure.
06

Colour

Custom colour base; artwork carries the print colour

  • The face is supplied in two base colours: white and clear. Graphic colour is produced at the printing stage, not in the media.
  • If a project needs a specific base colour, it is achieved by printing an opaque underbase and pairing it with the adhesive colour that gives the required hiding.
  • Colour work is a joint decision between the printed underbase and the adhesive colour underneath it. Both are matched together so the result holds to the same colour target.

STOCK RANGE ON WHICH A CUSTOM BUILD IS BASED

Which Vinyl Wrap Models Are Available?

These are the constructions currently on the shelf. A customised build starts from one of them and moves on the axes above: face resin, caliper, adhesive colour, tack grade, liner and width.

ModelCaliperFaceAdhesiveLinerTypical use
P-1241130 ± 10 μmWhite PVC, glossy, polymericHigh-tack removable, grey140 g diamond-embossedThe workhorse for bus and coach flanks, full-side application
P-1018130 ± 10 μmWhite PVC, glossy, polymericHigh-tack removable, grey140 g diamond-embossedFive-year outdoor full-side work, long-cycle advertising
P-1242140 ± 10 μmWhite PVC, glossy, polymericRemovable, black140 g diamond-embossedDark bodies, corrugated box bodies, covering an old campaign
P-1104140 ± 10 μmWhite PVC, glossy, monomericRemovable, white100 g diamond-embossedPale bodies and pale substrates, where white adhesive lifts the colour
P-121585 ± 10 μmWhite PVC, glossy, monomericRemovable, grey120 g diamond-embossedThin and conformable for narrow, shaped and compound-curve areas
P-1266180 ± 10 μmWhite PVC, glossy, monomericRemovable, clear140 g single-PEMaximum stiffness on large flat planes with little backing support
P-1016140 ± 10 μmWhite PVC, glossy, polymericHigh-tack removable, white140 g single-PEBillboard, light box and building facade work
P-101785 ± 10 μmWhite PVC, matt, polymericHigh-tack removable, white140 g single-PEMatt surface for shop windows and close-reading situations
P-1009125 ± 10 μmWhite PVC, glossy, monomericHigh-tack removable, clear140 g single-PEGeneral-purpose, white glossy face
P-1081115 ± 10 μmWhite PVC, glossy, monomericRemovable, clear120 g single-PEGeneral-purpose, removable
P-1220160 ± 10 μmWhite PVC, glossy, polymericRemovable, black160 g single-PEThick black adhesive where light must be blocked out
P-1229110 ± 10 μmWhite PVC, glossy, monomericRemovable, clear140 g single-PEFully removable flat build, small signage and fine artwork
P-1250130 ± 10 μmWhite PVC, glossy, monomericRemovable, black140 g single-PEFlat liner, black adhesive

Taken from the current A4 vehicle wrap sample. P-1018, P-1241, P-1242, P-1104, P-1215 and P-1266 carry the diamond-embossed air-egress structure; the remaining models are flat-liner builds. Common to every model: five widths, 50 m roll length, and a printable face verified on SOL, ECO, UV and LATEX.

VINYL SELECTION BY APPLICATION

Vinyl Selection Guide for Different Applications

Recommended configurations for the six jobs we run most often. The numbers move with the project, but the reasoning behind each one holds.

Custom printed vinyl wrap applied to a bus and coach flank

B1Vinyl for Bus & Coach Whole-Body Advertising

The flank and the rear are the largest single panels in vehicle advertising. A typical job runs 6 to 12 m of continuous length over wheel arches, door seams and lamp cut-outs. The fleet runs to a timetable. The application window is usually one night shift, and the vehicle has to be back in service for the first morning run.

  • Build: polymeric 130 μm, high-tack removable grey adhesive, 140 g diamond-embossed liner, 1.37 m or 1.52 m roll width.
  • Application: the air-egress channels let the fitter vent from the centre of the image outwards in sections. Confirm ambient and panel temperature before application, 10 °C minimum. Cold affects the initial tack and delays channel close-down. In winter, pre-warm the body to process requirement rather than heating the film directly.
  • Watch item: when the campaign runs past six months, edge-holding becomes the variable that decides the service life.
Printable vinyl film covering an old livery on a box truck body

B2Vinyl for Box Vans & Dark Bodies

A dark body or an old livery that is being replaced needs real hiding power. If the substrate colour or the previous graphic reads through the face, the new image picks up blotches, shadows or a colour shift.

  • Build: polymeric 140 μm, black adhesive, 1.52 m roll width.
  • The black adhesive blocks the light itself. The substrate colour does not take part in the appearance, so the old campaign is buried by the printed underbase.
  • Preparation: level out any uneven substrate profile before the film goes down.
Custom printed vinyl wrap on transparent retail shopfront glazing

B3Vinyl for Shop Windows & Retail Glazing

Glass is a transparent, low-absorption substrate. A window graphic has to carry the image and still pass some light. Face transparency, adhesive colour and gloss level are therefore decided together with the display intent.

  • Build: clear face with clear removable adhesive, 100 g flat liner, slit to the window size.
  • Where there is close reading or visible in-store tube lighting, move to a matt face. The reflection is what people notice, not the opacity.
  • Slit to 1.07 m for a typical shopfront bay.
Removable custom vinyl wrap graphics on exhibition stand panels

B4Vinyl for Exhibition Stands & Pop-Up

Exhibition and pop-up projects carry a fixed build date and a fixed teardown date. The film has to hold the image for the duration of the show, and it has to leave the stand surface in good condition.

  • Build: monomeric 85 μm, removable grey adhesive, flat liner. Exhibition stands are mostly flat sheet, so conformability is not the problem. Use the thin gauge on curved and shaped elements.
  • Teardown: pull along the adhesive/substrate interface at 45° or less, slowly. A surface that has been in direct sun should be allowed to cool first.
Large format custom vinyl wrap on a billboard and building facade

B5Vinyl for Light Boxes, Billboards & Facades

Fixed outdoor installations and building facades sit in sun, rain and temperature swing for years. Here the material system, the service life, the surface protection and the seam layout all have to be decided before the first roll is cut.

  • Build: polymeric 140 μm, high-tack removable grey adhesive, 140 g diamond-embossed liner, with the B-1013 gloss cold laminate.
  • On a tall facade, take 1.52 m to reduce the number of seams, and set every seam on a structural joint or a frame edge.
Custom printed vinyl wrap on an equipment panel and furniture face

B6Vinyl for Equipment Panels & Furniture Faces

Equipment housings and furniture panels have to look right, take everyday contact and still be serviceable later. Surface energy, texture and environment differ from substrate to substrate, so the film cannot be chosen on appearance alone.

  • Build: gloss or matt face set by the decorative intent, flat liner on flat sheet. Where the panel is never changed, use permanent or semi-permanent. Where the graphic updates with the product, use a removable grade.

LABELLET MANUFACTURING CAPABILITY

Why Choose Labellet for a Custom Vinyl Build?

Coating, embossing, slitting, rewinding and packing sit inside our own plant. That is what lets a custom build start at one roll instead of a container minimum.

Coating line

Coating, drying and reeling run in one large coater, with a maximum web width of 1300 mm. The treatment on the printable face and the pressure-sensitive adhesive are applied continuously on the same line. The surface treatment therefore cannot be separated from the glue bed.

Emboss and coat, scheduled together

The diamond pattern of the embossed liner, the coating weight of the adhesive and the drying condition are set as one recipe. The channel geometry and surface condition of the finished roll are then checked. That is what keeps the behaviour repeatable across batches.

Slitting and rewinding

Two high-speed slitters and two rewinders, all working to 1300 mm. The catalogue web width list goes to 1520 mm. Any specification beyond the machine width is confirmed during order review, with the production and supply route spelled out.

Sample and sheet cutting

A 350 mm sample machine for small-batch trial, and a 600 mm automatic sheet cutter for converting roll stock into sheets. A physical sample can be approved before the bulk run starts.

Factory and R&D base

A plant of roughly 70,000 m², more than 300 staff and over 20 years in the industry. ISO 9001, ISO 14001 and FSC-COC certification, more than 50 invention patents, and national high-tech enterprise and specialised-and-new SME recognition.

Patent reserve

The patent reserve covers scratch-resistant vehicle film, flame-retardant automotive film, corrosion-resistant automotive film, anti-static vehicle film, weather-resistant printing film, high-wear home decoration film, opaque printing film, anti-oxidation cold laminating film and heat-resistant PVC sublimation film. More than 50 invention patents in total.

Scratch-resistant vehicle filmFlame-retardant automotive filmCorrosion-resistant automotive filmAnti-static vehicle filmWeather-resistant printing filmHigh-wear home decoration filmOpaque printing filmAnti-oxidation cold laminating filmHeat-resistant PVC sublimation film

FOUR-STAGE QUALITY MANAGEMENT

How Labellet Controls Custom Vinyl Quality

Incoming, in-process, finished-product and dispatch inspection. Each stage runs to its own checklist and keeps its own records, so a batch can always be traced back.

Incoming inspection (IQC)

PVC face, adhesive and liner are checked against the incoming specification: face surface condition, adhesive uniformity, liner flatness and batch identification. Thickness, grammage, tensile strength and elongation at break are physically tested where the specification calls for it. Restricted elements are screened by X-ray fluorescence (EDX 3000C), and accepted material is stored under its batch number.

In-process inspection (IPQC)

The coating stage is checked for coating weight, coating uniformity and drying state. The slitting stage is checked for finished width, winding neatness and end-face quality. Each roll gets a visual inspection, and thickness and grammage are re-tested against the inspection plan.

Laboratory testing

The lab runs a 128-item protocol. Equipment includes constant-temperature and constant-humidity chambers, an X-ray fluorescence spectrometer, an abrasion tester, a tensile tester, ageing equipment, a BL-6010B holding-power tester for pressure-sensitive tape, an inclined-ball tack tester, a TH-110 benchtop haze meter and microscopes. Together they cover composition, mechanical, optical, weathering and wear properties.

Final inspection (FQC) and dispatch (OQC)

Inspection, finished-product and dispatch records are retained per batch. Customers can request the applicable test reports, certification documents and product quality records for supplier audit and internal filing. Each batch traces back to raw material, production line, test record and operator.

Management systems and third-party testing

  • ISO 9001, ISO 14001 and ISO 45001 management systems
  • FSC-COC chain of custody (certificate RINA-COC-004122) and Disney FAMA authorisation
  • SGS third-party reports available on request; the applicable JIS and GB standards are stated in each product report

TEST METHODS APPLIED TO VINYL

How Do You Test Vinyl Wrap Quality?

The methods below are the ones a spec sheet usually argues about: peel on the actual substrate, tack in the cold, and shrinkage after a hot summer. The right-hand note says why that test exists.

Test itemTest objectMethod / standardWhy it is on the sheet
180° peel adhesionStainless steel / aluminium / factory paintASTM D3330 / GB/T 2792Reported per substrate, because a peel figure taken on stainless says nothing about a painted panel.
Initial tackRing tack methodFINAT FTM 9 / GB/T 4852Cold and slow application is visible here before it is visible on the panel.
Shear holding power1 kg static shearFINAT FTM 8 / GB/T 4851Quoted at the service temperature the job actually runs at.
Residue and substrate conditionVisual and cross-hatch after removalASTM D3359 / ISO 11339The line that decides whether the next campaign can be applied over this one.
Ink adhesionCross-hatch, 5B classASTM D3359 / ISO 11339Checked on the printed face, not on the raw film.
WeatheringColour difference ΔE and adhesion retentionISO 4892-2 xenon / ASTM G154 fluorescent UVVertical, exposed orientation. Horizontal shelf tests overstate the result.
Dimensional stability70 °C × 24 h, free shrinkageASTM D1204The number that decides whether a seam opens after a hot summer.
Wash resistanceImage condition after standard wash cyclesIn-house standardRelevant to wash lines and to the alkaline cleaners used on fleet bodies.
Anti-staticSurface resistivityIn-house standardSpecified for environments where static discharge damages the print.
Light transmission and hazeBatch optical consistencyIn-house standardChecked on clear-face builds where the glass has to keep reading as glass.
Total thickness and grammageTolerance band judgementIn-house standardNominal caliper is meaningless without the tolerance band that goes with it.
Tensile strength and elongation at breakFilm mechanical propertiesASTM D882Tells you whether the web survives a hard roll onto the core.
RoHS restricted substancesTen restricted substancesIEC 62321 series, third-party laboratoryTested where the project requires it.
Flame performanceB1 grade for vehicle interiorGB 8624Submitted per project as a single-item test.

Application cases

Three Custom Vinyl Jobs, With the Checks That Closed Them

Each record below states what was ordered, how the application was controlled, and what was checked afterwards. Nothing here is a mock-up.

Custom printed vinyl wrap applied to a city bus flank

City Bus Campaign Changeover

Regional bus media operator · quarterly refresh, five vehicles per batch

Customer
Regional operator running body advertising on a fleet of 40 vehicles, with a fixed seasonal changeover window every quarter.
Product requirements
P-1241 polymeric 130 μm with high-tack removable grey air-egress adhesive for full-side body application.
Material structure
Polymeric 130 μm face + high-tack removable grey adhesive + 140 g diamond-embossed liner. Flanks evaluated at 1.52 m roll width; the rear is split by curvature.
Verification
Fleet changeover schedule · 24 h lay-down inspection, 90-day edge review, residue check at removal.

What we finally produced:

  • Whole vehicle applied inside a single night window, back in service for the first morning run.
  • Edges wrapped 5–10 mm and heat-pressed; seams set on pillars and structural joints.
  • Body pre-warmed where the bay temperature fell below 10 °C, because cold adhesive grabs unevenly.
  • Removal checked for paint-safe residue and substrate condition after the first changeover.

Final delivery: Layout and width drawing + lay-down check sheet + 90-day edge report + removal inspection note.

Printable vinyl film applied to retail shopfront glazing

Retail Shopfront Banner

Chain store operator · quarterly window refresh on transparent glass

Customer
Operations team of a national retail chain, refreshing roughly 200 shopfront windows each quarter.
Product requirements
Clear face with clear removable adhesive and a 100 g flat liner, slit to the window size.
Material structure
Clear PVC face + clear removable adhesive + 100 g flat liner, slit to 1.07 m for the storefront bay.
Verification
Light transmission and haze checked per batch · 30-day edge review · residue check on removal.

What we finally produced:

  • Glass cleaned with alcohol and a lint-free cloth to an oil-free, particle-free surface before application.
  • Edges pressed down; a matt face substituted where in-store tube lighting reflected on the image.
  • Light transmission compared visually after application. The glazing still reads as glazing.
  • Removal leaves no adhesive film and no change in glass clarity.

Final delivery: Slit width schedule + transmittance comparison + 30-day edge report + post-removal substrate report.

Custom vinyl wrap graphics on exhibition stand panels

Exhibition Stand Graphics

Exhibition contractor · five-day show, mixed flat and shaped stands

Customer
Stand-building contractor with a five-day show in the diary and a teardown date fixed by the venue.
Product requirements
P-1215 monomeric 85 μm with removable grey adhesive on a flat liner, cut to the stand sizes.
Material structure
Monomeric 85 μm face + removable grey adhesive + flat liner, cut to the stand dimensions.
Verification
Visual check during the show · teardown inspection for residue on the stand surface.

What we finally produced:

  • Slots pre-cut on shaped elements so the film can follow the geometry.
  • The 85 μm build was chosen because the stand included compound curves that a heavier gauge would bridge.
  • Teardown pulled along the adhesive/substrate interface at 45° or less, away from the hot afternoon sun.
  • Stand surface checked after removal: no residue and no surface damage.

Final delivery: Cutting drawing with slot positions + show-period inspection log + teardown substrate report.

DELIVERY TERMS

What Is the Production Lead Time for Labellet's Vinyl?

Stock constructions ship in about 7 days and standard production runs about 15 days. A build that departs from the standard, with a new caliper, a liner grammage that is not on the shelf or a different adhesive colour, is quoted at about 45 days. The adhesive has to be applied and cured on our own coating line.

~7 daysStock lead time

Stock caliper, adhesive colour and liner held on the shelf, slit to the ordered roll width.

~15 daysStandard production

A stock construction run to your roll width, liner and delivery format, without a new coating recipe.

~45 daysCustomised build

A new caliper, a non-standard liner grammage or a different adhesive colour, applied and cured on our own line.

The commercial terms behind a customised printable wrap order are set out below, from the one-roll minimum to the documents that travel with the shipment.

ItemSpecification
Minimum order quantityMOQ 1 roll
Stock lead timeapprox. 7 days
Standard production lead timeapprox. 15 days
Customised build lead timeapprox. 45 days
Sampling feequoted per project, itemised on the quotation
Payment termsProforma invoice on approval; 50% before production, 50% before dispatch
Quality documentsDispatch inspection report, certificate of conformity, material certification on request
Batch traceabilityMaterial → line → test record → operator
Shipping portsShenzhen, Zhuhai

BEFORE YOU SPECIFY

FAQ

Straight answers for the buyers and brand teams who print their own vinyl.

1Is the film itself printed at your factory, or do you supply blank media for my own printer?

Both routes exist. We supply blank printable media to SOL, ECO, UV and LATEX press rooms as standard. We can also ink the job in-house when you want the graphic and the film released together. The decision usually comes down to who holds the colour master: if you need a ΔE-matched brand colour across a mixed fleet or several substrate colours, print it here.

2What is the MOQ for a custom vinyl wrap order?

One roll. A custom gauge, adhesive colour or liner specification starts at a single roll for trial and proofing, so a first project does not carry a commodity MOQ. Repeat production on the same specification keeps the same construction and is priced on the run length.

3Can I get a specific adhesive colour to stop old graphics showing through?

Yes, and this is where most of the real decisions are made. A black adhesive blocks light entirely and kills show-through from an old livery or a dark body panel. Grey is the general-purpose compromise. White lifts colour on a pale body. Clear stays honest on glass, where you want to see the bed behind the graphic. Colour controls hiding, not bond strength.

4What is the difference between 85 μm and 180 μm in practice?

Gauge is stiffness. At 85 μm the sheet follows a compound curve, a light box and a shaped stand. At 180 μm it stands off a large flat panel with little backing support, and it will not conform to a tight radius. More thickness means more handling life on a construction site, but it means the fitter cannot close a gap without cutting it. Choose gauge against the geometry of the substrate, not against the picture.

Send the Project Brief. Get the Build Sheet Back in 24h.

Substrate, service life, panel size and quantity. We return face, caliper, adhesive, liner, width and price.

Request Free Sample
Email
WhatsApp
WhatsApp QR code
WeChat
WeChat QR code
Labellet Manufacturer
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.