☎ +86 13392540241 ✉ sale@labellet.com 🕒 26 yrs label experience  ·  ISO 9001 CERTIFIED

TAMPER EVIDENT LABELS · VOID · HOLOGRAPHIC · LASER-NUMBERED SEALS

Tamper Evident Labels That Prove the Moment of Opening

One factory for VOID, colour-change, holographic and single-use transit seals. Tell us your pack and how it opens. The coating, glue and code will match it.

98%+ leave-word completeness4 × 8 mm smallest legible mark100% first-scan at 30 cm5-day standard proofing

SIX SOLUTIONS · FIVE TECHS · ONE FACTORY

Labellet — Tamper Evident Label Manufacturer in China

Bottle rings, food tapes, pharma foil marks, cosmetic rings, e-commerce seals, logistics tags, drum closures. One factory covers them all with five techs: VOID, colour-change ink, holographic security, transfer film and single-use numbered seals. Below is what each one takes.

VOID Coating and Adhesive Paired In-House

We coat our own VOID release layer and pair it with the adhesive before printing starts, so the seal leaves a clean message instead of failing at the parting line. How peel and transfer are set per substrate is explained in FAQ 1 below.

Security and Tamper Proofing in One Pass

A single seal handles both sides. Holographic film, microtext and invisible ink answer one question: is it real? The VOID layer and serial answer the other: was it opened? A scannable code backs both for traceability. Flexo, hologram, VOID and variable-data units run inline, so it leaves our press ready for your line.

Variable Data and One-Item-One-Code as Standard

Laser, inkjet and impression coding sit on the same lines as the presses. Every seal can leave with its own serial, QR or masked code, checked optically and by scan, and mapped to a database your dealers or shoppers can query. Readability figures are in the lab sheet below.

FIVE EVIDENCE TECHS AT A GLANCE

Pick the Tamper-Evidence Techs That Fits the Risk

Peel-and-read, heat-flag, shatter-on-lift, transfer-to-pack or break-the-seal. Match the Tech to the risk you face.

TechPositionHow opening showsFirst-choice constructionTypical home
T1WorkhorsePeel leaves “VOID” or brand wordingVOID leave-word filmBottle necks, cartons, pharma boxes, cosmetic caps
T2Heat / steam dutyColour-change ink flags retort or tamperingColour-change + VOIDRetort food pouches, can membranes, hot-fill seals
T3High-value goodsHologram shatters, cannot be re-laid flatHolographic VOIDSpirits, perfume, high-end skin care, electronics
T4Transfer proofMessage transfers to the pack, film goes blankTransfer leave-wordCorrugated shippers, pails, meter and valve seals
T5One-time sealSeal tooth breaks, number dies with itLaser-numbered PP / PET seal + foil stripDrums, tote boxes, containers, calibration tags

From bottle necks to drums

Six Tamper Evident Solutions by Pack Type: Bottles, Food, Pharma, Cosmetics, Cartons & Drums

Each card shows where it fits, what to watch for, and what a signed-off seal looks like. You approve only what will survive the shelf or the sort line.

S1 · Bottle Necks & Wine ClosuresTamper Evident Bottle Neck Labels and VOID Closure Rings

25–50 μm PET / BOPP holographic film · VC ring + collar, Ø 26–32 mm

A bottle ring only gets one pull. Curved glass and thread ridges lift stiff film. Cellar condensate and red-wine seepage weaken ordinary glue. Carton rubbing fades soft print. And the message left behind still has to read well enough for enforcement or a claim. The VC ring and collar label are planned as one set for this reason: the ring takes the opening, the collar takes the brand.

  • Typical: disposable glass-neck VOID ring, aluminium pilfer cap, cap label, gift-box wine strip.
  • Build: 25–50 μm PET or BOPP laser-metallised film + strong acrylic water-based glue (condensate- and seepage-resistant) + VOID layer (“VOID” or custom wording + serial) + digital coding / micro QR; hologram layer optional for double security.
  • Release: transfer ≥ 98% on the mouth, contrast ≥ 4.5, serial and code pass first scan, wrap on Ø 26–32 mm necks with no edge lift.

S2 · Food Packs & Retort PouchesTamper Evident Food Packaging Seals That Survive the Retort

121 °C / 15 min rated · food-grade inks, 60–90 g or 30–50 μm

Fresh food seals work through three rounds in a row. A 121 °C retort first, then oily and salty contents, then 0–4 °C chilled storage. Heat alone is rarely the killer. Ink that survives steam can still bleed in oil. Glue that grabs at room temperature can go slack in the chiller. The closure still has to meet its heat-seal strength, and nothing from the mark may reach the food.

  • Typical: noodle tub membrane, fresh-tray lidding seal, bakery bag strip, canned-food foil membrane, cap foil tab.
  • Build: 60–90 g wet-strength synthetic paper or 30–50 μm foil / metallised film + retort glue rated 121 °C / 15 min + thermoset crosslinked acrylic against resealing + food-grade inks to GB 4806.1 / FDA 21 CFR 175.105.
  • Release: message intact after 121 °C / 15 min, no bleed after 24 h in 60 °C palm oil, nothing migrates to contents, no lift after 30 days chilled, heat-seal strength to ISO 12647.

S3 · Pharma Blister & Vial MarksTamper Evident Pharmaceutical Labels Down to 4 × 8 mm

4 × 8 mm foil mark · contrast ≥ 4.5, GB 31604.1

A pharma tab can be as small as 4 × 8 mm, yet it still has to read. The foil mark shares the pack with the drug ID and trace code, so neither may crowd the other. The layout answers to pack-material registration and cGMP pack-integrity validation. After opening, the message photographs cleanly for adherence uploads.

  • Typical: oral-solid blister missing / discard tab, vial outer label + opening ring, pharma carton closure tab, vaccine cold-chain case seal.
  • Build: 25–30 μm foil / metallised PET with low-migration inks + fast-setting acrylic with no plasticiser or migrants + GS1 / drug trace code alongside, bilingual “discard / defect” pictogram optional.
  • Release: contrast ≥ 4.5 and readable at 4 × 8 mm, migration to GB 31604.1, 3 mm or more clear of the blister seal zone, transfer image readable by phone camera for upload.

S4 · Cosmetics & Personal Care CapsTamper Evident Cosmetic Seals for Pumps, Caps and Tubes

25–40 μm PET / holographic film · embossed logo over VOID, ISO 22715

A cosmetic ring sits on threads and shoulder curves, where stiff film wrinkles. Plant oils, silicone and alcohol bleed soft ink. The embossed logo and the VOID layer have to work together, not fight. The face still has to look untouched after months on shelf. The layout follows ISO 22715 throughout.

  • Typical: cream / shampoo / perfume cap ring, pump-head tab, tube-mouth membrane, tester anti-theft seal, refill-pack mark.
  • Build: 25–40 μm PET or laser-metallised film + medium-tack oil- and alcohol-resistant acrylic (leaves type, never lifts whole) + VOID in brand name / “TAMPERED” + embossed logo + spot UV + full-matte oil-resistant varnish against shelf rub.
  • Release: type stays in the glue on opening, message intact after 100 wipes of 70% alcohol, no wrinkle on shoulder curves, no fading after shelf rubbing.

S5 · E-commerce Cartons & Retail BoxesTamper Evident E-commerce Box Seals With a Scannable Code

80–120 g / 250 g board · one code per seal, first-scan 100%

A courier-box seal sells the brand and guards the box at the same time. Rough flute defeats ordinary glue. Sortation drops and crushes test the evidence. Every piece needs its own number, and the shopper at the door should verify it with one scan.

  • Typical: branded courier-box closure, colour-box shrink band, logistics tamper tape, paper-box strip, multi-pack bundle seal.
  • Build: 80–120 g coated stock / 250 g white board + strong acrylic + VOID layer with brand logo + “VOID” + laser / inkjet serial + verification QR per piece, postage / carrier panel optional.
  • Release: no lift on uneven board after 72 h, evidence intact after drop-and-crush sortation runs, every code live in the database, shopper first-scan 100%.

S6 · Drums, Totes & Calibration TagsTamper Evident Drum Seals and One-Time Transit Seals

−30 to 70 °C, 200 h xenon · break-once seal, gap ≤ 0.5 mm

Drum and meter seals live outside on steel, through UV and sharp temperature swings. Curves and odd shapes defeat flat labels. The seal works with a hasp or cord, breaks once, and never goes back on. Numbers stay unique and non-copyable from −30 to 70 °C.

  • Typical: metal / chemical drum one-time seal, tote-box seal, container hasp substitute, valve and line seal, calibration tag.
  • Build: single-use PP / PET pull-tight seal with laser number linked to your system + metal-base VOID strip in weatherable foil / film + self-fastening nylon strap + anti-transfer laser layer against copying.
  • Release: readable after −30 °C and 70 °C exposure, numbers 100% unique and non-copyable, 0.5 mm or tighter on formed cylinders, colour shift ΔE ≤ 3.0 after 200 h xenon.

Need a destructible transfer film or a masked scratch code on the same seal? Both run inline. Ask for the options sheet.

EVERY BUILD, ONE TABLE, SIDE BY SIDE

Tamper Evident Label Specifications Compared: VOID, Foil, Pharma & Transit Seals

All six selections (A to F) compared on face, leave-word technology, adhesive, print and compliance. Start here before you ask for a quote.

ItemA · Bottle ringB · Food sealC · Pharma markD · Cosmetic ringE · E-com box sealF · Drum seal
Face stock25–50 μm PET / laser-metallised BOPP30–50 μm foil / metallised film / wet-strength synthetic25–30 μm foil / metallised PET25–40 μm PET / laser-metallised film80–120 g coated / 250 g white boardPP / PET one-time strip + foil
Leave-word techVOID leave-wordVOID / colour-changeVOID, low-migrationVOID leave-wordVOID leave-wordLaser one-time number
AdhesiveStrong acrylic water-basedRetort-crosslinked acrylicFast-setting low-migration acrylicMedium-tack oil- and alcohol-resistantStrong corrugated-grade acrylicNo adhesive (mechanical seal)
Liner80 g glassine30 μm PET (clear / white)60 g glassine80 g glassine80 g glassineLinerless (strap seal)
Print4C + 1–2 spots + hologram4C + spot, food-grade inks1–2 colours, low-migration inks4C + spot + emboss + spot UV4C + spot + variable dataSingle colour / digital variable
FinishFull matte + spot UVHeat-proof matteFull matteScuff-proof matte + spot UVMatte lamination—
Security stackHologram + VOID + serialSerial + QRTrace code + leave-wordHologram + VOID + serialVOID + one-item-one-codeUnique number + one-time body
Service temp−10 to 50 °C−20 to 121 °C−20 to 60 °C−10 to 50 °C−10 to 60 °C−30 to 70 °C
Smallest sizeØ 20 mm15 × 15 mm4 × 8 mmØ 18 mm20 × 20 mmOne-time formed
Core complianceISO 12931 · ISO 17712-2GB 4806.1 · FDA 21 CFR 175.105Pharma pack & labelling rulesISO 22715Brand traceability rulesISO 17712-1 · ISO 12931
MOQ / lead3,000 pcs (digital 100) · 5 / 15 days5,000 pcs (digital 100) · 5 / 15 days5,000 pcs (digital 100) · 7 / 18 days3,000 pcs (digital 100) · 5 / 15 days3,000 pcs (digital 100) · 5 / 15 days1,000 pcs · 7 / 18 days

BUILT AROUND YOUR PACK

Custom Tamper Evident Stickers in 9 Decisions

Answer these with your packaging engineer and the quotation lands in one round. No back-and-forth over missing substrates, opening methods or code rules.

A · Pick the construction — steps 1–4

01 · Opening method

Send how the pack opens: hand-tear, twist-off, pull ring, tear notch or one-time transit seal. For drums and meters, the seal body itself breaks open. No adhesive involved.

02 · Leave-word technology

VOID, colour-change or laser one-time numbering. Pick from the route table above. Wording, warning copy and artwork are custom; letter spacing and stroke weight are proofed against how the fracture actually reads on tear.

03 · Face and gauge

We pick the face from your pack and opening method: PET, holographic BOPP, foil, metallised film, wet-strength synthetic, coated board or single-use seal strip, with low-migration options for drug packs. Exact gauges sit in the compare table.

04 · Adhesive system

Water-based, retort-crosslinked, fast-setting low-migration, oil- and alcohol-resistant, or a glue-free seal. Matched to the duty, not picked from a list. Retort work always takes the crosslinked grade.

B · Prove it opens once & finish it — steps 5–9

05 · Liner

Glassine, PET film or linerless seal. Set for your applicator and line speed. Food-closure tapes default to the PET liner.

06 · Service temperature

Cellar, chilled, shelf, yard or retort. Name the coldest, hottest and wettest day the seal will see. We verify against that cycle and file the report.

07 · Security and traceability

Mix hologram, VOID, serial, QR or a one-time body to fit the job. Every piece can verify by scan against your database. The coding rule is fixed at proof stage.

08 · Graphics and compliance

Artwork, warning size and release checks follow the standards that govern your market. The full clause list is in FAQ 4 below.

09 · Size and die

Send the pack drawing and we cut to it: neck rings, food tabs, pharma marks, cosmetic caps or shipper seals. Formed necks and shaped strips get their own steel dies.

LAB-VERIFIED PERFORMANCE DATA

How Our Tamper Evident Security Seals Test

The builds below all passed opening trials plus climate exposure. Peel, transfer, scan and colour are re-checked against the sign-off sheet. The 10 evidence-critical lines show first. Expand for the full sheet.

Top 10 evidence-critical results first · full sheet on expand
PropertyTest Standard / MethodLabellet Typical ValueIndustry Reference
180° peel strengthISO 29862 / 180° peel18–28 N/25 mm by face≥ 12 N/25 mm
Leave-word completenessVisual check after opening≥ 98%≥ 92%
Leave-word contrastGreyscale vs. substrate≥ 4.5≥ 3.0
Leave-word durabilityMessage check 30 days after openingNo visible fade—
Re-stick after openingRe-applied, held 24 h≤ 15% hold (near-zero tack)≤ 30%
Laser code contrastLaser marking check≥ 40%≥ 30%
Code readabilityScan at 30 cm, first read100%≥ 98%
Serial uniquenessDatabase comparisonZero repeatsZero repeats
Retort survival121 °C steam / 15 minMessage intact, no delamination100 °C / 15 min
Heat-seal strengthISO 12647 vacuum heat-sealPeel with no split—
Damp heat40 °C / 90% RH / 48 hNo lift, no walk35 °C / 24 h
Low temperature−20 °C / 72 hNo de-bond, no edge lift−10 °C / 48 h
High temperature80 °C / 48 hNo lift, no residue60 °C / 24 h
Water immersion23 °C water / 72 hNo delamination, no ink bleed24 h
Oil and greasePalm oil 60 °C / 24 hNo bleed, no delamination40 °C / 24 h
Alcohol rub70% alcohol, 100 cyclesMessage intact50 cycles
Solvent wipePetrol / ether wipeMessage intact—
Light ageing & batch colourXenon-arc 200 h + spectrodensitometerΔE ≤ 3.0 after exposure; ≤ 3.0 batch-to-batchΔE ≤ 5.0
Die-cutting accuracyChecked at 20×≤ ±0.2 mm≤ ±0.3 mm

How to read this table: 180° peel = opening force · completeness = evidence yield · ΔE = colour shift · re-stick = non-resealability.

Need the full lab report behind a line item? Email sale@labellet.com with your pack, opening method and substrate. We reply within 24 hours.

WHY LABELLET FOR TAMPER EVIDENCE

Why 1000+ Clients Trust Us

Tested for harsh duty

Outdoor use from -30 to 70 °C, 121 °C retort, 40 °C / 90% RH damp heat, 60 °C palm oil, 70% alcohol, petrol and ether wipes. Tamper seals rarely work in clean rooms. We pick the build for the duty and back it with the matching exposure report.

Readable at 4 × 8 mm

Pharma foil marks must stay complete and sharp inside a few millimetres. Coating weight is matched to ink density, so the transfer holds contrast 4.5 or better within 4 × 8 mm. The trace code beside it still scans.

Three gates, four tamper checks

Incoming check, in-process patrols and final inspection guard every job. Tamper work adds four 100% pulls: 180° peel force, transfer completeness, message contrast and code readability. Codes pass optical and scan checks together.

At home with the seal standards

ISO 12931 for tamper labels, the ISO 17712 seal series, ISO 22715 for cosmetics, EU GMP Annex 15 for pack integrity, FDA 21 CFR Part 211 for cGMP packing, the FDA food tamper packaging guidance, plus China pharma pack and labelling rules. Structure, leave-word placement, warnings and validation follow the clause that governs you.

Request Free Sample

Free swatch pack · replies in 24h

No spam. Prefer email? Write to sale@labellet.com

Success stories

Proven in Production, Documented for QA.

2 tamper evident builds (spirits neck and skin-care cap), each shipped with opening samples and test reports.

Spirits Neck VOID Ring — Holographic PET + Serial

Spirits Neck VOID Ring — Holographic PET + Serial

Premium baijiu closure · distillery group in China

Customer
Headline baijiu brand in China (strong-aroma range).
Product Requirements
One-time VOID neck ring with pilfer-cap tab. It replaces a previous seal that lifted whole off damp bottles.
Material Structure
Holographic VOID neck construction with per-piece serial + micro QR, adhesive set for wet glass.
Compliance
ISO 12931 · ISO 17712-2 · brand diversion-control rules.

What we finally produced:

  • What we changed: adhesive and VOID fracture tuned to the distillery’s own bottle. Opening now leaves a complete, readable message. Not a re-usable ring.
  • Every serial scanned into the warehouse file. A diverted bottle traces to the dealer.
  • Hologram fractures on lift and cannot be laid back flat.

Final Delivery: AI + PDF press file + hologram proof + die line + peel samples + transfer test + serial coding sheet.

Skin-Care Cap Ring — VOID That Survives Oil and Alcohol

Skin-Care Cap Ring — VOID That Survives Oil and Alcohol

Wash care and fragrance caps · personal-care group in China

Customer
Leading wash-care and fragrance brand in China.
Product Requirements
Cap VOID ring with pump-head tab and tester seal. It replaces a previous ring that wrinkled on shoulders and rubbed pale on shelf.
Material Structure
VOID cap construction with embossed logo + spot UV and scuff-proof varnish, adhesive set for oily, alcohol-dosed caps.
Compliance
Cosmetic packaging and labelling rules (see FAQ 4).

What we finally produced:

  • Fix: a softer-tack adhesive plus shallower emboss, tried on three cap batches. Opening now leaves type in the glue.
  • Shoulders wrap without wrinkle; shelf-rub panels come back clean with the logo intact.
  • The shelf look stays, and so does the opening evidence.

Final Delivery: Press file + emboss die + spot-UV film + die line + peel samples + curve-fit report.

BEFORE YOU QUOTE

FAQ

Straight answers for buyers and packaging engineers.

1Will the VOID message stay complete on glass, PET, metal and corrugated board?

Yes, when the coating and adhesive are matched to the surface. Glass and PET bottles, tinplate and aluminium, corrugated and plastic pails each get their own build, with peel and release tuned per surface. That avoids the two classic failures: broken lettering, or the whole seal lifting off in one piece. On signed-off builds, transfer typically holds at 98% or better.

2What is the MOQ and lead time?

Standard VOID builds start at 3,000 pcs (digital from 100 pcs): 5-day proofs, 15-day production. Pharma foil marks and one-piece transit seals run 7 / 18 days because the low-migration adhesive and the seal forming take an extra round of verification.

3How do VOID, colour-change ink, holographic and transfer leave-word compare?

Start with what worries you most. Where a readable wording must stay on the pack, VOID is the default. Where a rub or heat flag matters more than wording, colour-change does the job. Premium bottles and high-value goods take holographic, because a re-laid seal is the real fear there. And where a full warning plus graphics must survive, transfer carries the whole message across. The route table above shows the construction and cost position for each. Send the pack and opening method and we place the route before quoting.

4Which standards apply to tamper evident seals?

It depends on the pack, but most briefs draw on the same set. ISO 12931 sets what the label itself must do: a legible message, colour shift or break, plus how to verify it. ISO 17712 covers the seal family in three parts: general principles, plastic-film seals such as bottle rings, and the test plans. Cosmetic closures add ISO 22715 for packaging and labelling. In the lab, heat-seal strength follows ISO 12647 and 180-degree peel follows ISO 29862. Food seals add GB 4806.1 for food-contact safety, GB 31604.1 for migration, FDA 21 CFR 175.105 for US-bound adhesives, and the FDA tamper-evident packaging guidance for structure and validation. Pharma work adds EU GMP Annex 15 for pack-integrity validation and FDA 21 CFR Part 211 for cGMP packing. Send your market and pack type, and we set the build and release checks to the clauses that govern you.

Send Your Pack. Get Your Seal Spec in 24h.

Pack type, opening method, substrate and quantity. We return route, construction, proof date and price.

Request Free Sample
Email
WhatsApp
WhatsApp QR code
WeChat
WeChat QR code
Labellet Manufacturer
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.